Replacing The Fragrance Flacon - Miele heat pump dryer Operating Instructions Manual

Fragrance flacon
Damp laundry and longer drying dura‐
tions with sufficient heat transfer are
needed for the fragrance to be released
into the laundry effectively. The fra‐
grance will also be noticeable in the
room air during the process. Fragrance
is not released when using the Cool air
programme.
After drying
To avoid the fragrance escaping need‐
lessly:
 Turn the outer ring anti-clockwise un‐
til marker b is in position _.
– You will feel a slight resistance.
If you want to dry laundry without
adding fragrance occasionally: remove
the fragrance flacon and store it in its
original packaging until you want to
use it again. See the following section.
48

Replacing the fragrance flacon

When the fragrance is no longer suffi‐
ciently intense:
 Turn the outer ring anti-clockwise un‐
til markers a and b line up.
 Replace the fragrance flacon with a
new one.
Fragrance flacons are available to or‐
der from Miele or online at
www.miele-shop.com.