Additional Installation Requirements - Miele heat pump dryer Operating Instructions Manual

Installation and connection
Additional installation require‐
ments
Pushing the dryer under a worktop
This tumble dryer is suitable for push‐
ing under a worktop.

It is very important to avoid a
build-up of heat. The warm air which
is expelled from the dryer must be
able to dissipate. Warm air which
cannot dissipate could cause a fault.
– The appliance lid cannot be re‐
moved.
– The electrical socket must be located
in an accessible position near the ap‐
pliance.
– Drying durations may increase slight‐
ly.
Optional accessories
– Washer-dryer stack
The tumble dryer can be combined with
a Miele washing machine in a washer-
dryer stack. The appropriate Miele
washer-dryer stacking kit is required.
– Plinth
The tumble dryer can be fitted on a
plinth with drawer (please note the
plinth may not be available in all coun‐
tries).
62