Miele heat pump dryer Operating Instructions Manual page 8

Warning and Safety instructions
Technical safety

Before setting up the tumble dryer, check it for any externally visi‐
ble damage.
Do not install or use a damaged tumble dryer.

Before connecting the tumble dryer, ensure that the connection
data on the data plate (fuse rating, voltage and frequency) match the
mains electricity supply. If in any doubt, consult a qualified electri‐
cian.

The electrical safety of this tumble dryer can only be guaranteed
when correctly earthed. It is essential that this standard safety re‐
quirement is met. If in any doubt, please have the household wiring
system tested by a qualified electrician. Miele cannot be held liable
for the consequences of an inadequate earthing system (e.g. electric
shock).

Do not connect the appliance to the mains electricity supply by an
extension lead, multi-socket adapter or similar. These can overheat
and are a fire hazard.

If the electrical connection cable is faulty it must only be replaced
by a Miele authorised service technician to protect the user from
danger.

Unauthorised repairs could result in unforeseen dangers for the
user, for which Miele cannot accept liability. Repairs should only be
undertaken by a Miele approved service technician, otherwise any
subsequent damage will not be covered by the guarantee.

Faulty components must only be replaced by genuine Miele origi‐
nal spare parts. The manufacturer can only guarantee the safety of
the appliance when Miele replacement parts are used.
8