Buzzer Volume; Keypad Tone; Conductivity; Total Consumption - Miele heat pump dryer Operating Instructions Manual

Settings menu

Buzzer volume

The buzzer can be set to be louder or
quieter.
The setting selected is shown in a bar
chart.
Factory default: a medium setting.
– Quieter       
– Louder       
You will hear the buzzer change as the
setting is selected.

Keypad tone

When this function is activated a tone
will sound each time a button is press‐
ed.
Options
– On
– Off (factory default)

Conductivity


The Low option should only be
selected if the residual moisture
reading in your laundry is incorrect
due to extremely soft water.
Options
– Normal (factory default)
– Low
Conditions
The Low option should only be set if the
water used for washing the laundry is
extremely soft with a conductivity read‐
ing (electrical conductivity) of less than
78
150 μS. Contact your local water au‐
thority for the conductivity level of your
mains water supply.

Only activate the Low option for
the conditions described above.
Otherwise drying results can be un‐
satisfactory.

Total consumption

You can display the total consump‐
tion.
Options
– Display
The total consumption is displayed in
kWh.
– Reset function
The total consumption to date will be
deleted with the Reset option.