Miele heat pump dryer Operating Instructions Manual page 18

Operating the tumble dryer
Perfect Dry indicator
With programmes with a selectable dry‐
ing level, the Perfect Dry system calcu‐
lates the residual moisture present in
the laundry to ensure a precise drying
result.
The Perfect Dry indicator . . .
. . . will flash after the programme has
started and go out when the pro‐
gramme duration appears in the dis‐
play.
. . . will light up again when the selected
drying level is reached and remain on
until the end of the programme.
. . . will remain dark with the following
programmes: Woollens handcare, Silks
handcare, Cool air, Warm air, Basket
programme.
Estimated time remaining
After the programme has started the
estimated programme duration will ap‐
pear in the display in hours and mi‐
nutes.
The programme duration displayed for
programmes with a selectable drying
level may vary or "jump". The following
factors, among others, affect the pro‐
gramme duration displayed: the quanti‐
ty of the laundry, the type of fabric and
the residual moisture in the laundry. The
electronics continually access condi‐
tions in the appliance and adjust the
programme duration with increasing ac‐
curacy.
18
Examples on how to operate the ap‐
pliance
Scrolling through a list
The  arrows in the display indicate
that a selection is available:
Automatic plus
Touching the  sensor scrolls down the
list to the next option and touching the
 sensor scrolls up the list to the next
option.
The OK sensor is used to confirm your
selection.
Identifying options selected
Normal
If an option has been activated with
OK, it will be given a tick.
Setting numerical values
Duration
A numerical value is highlighted in
white. Touching the  sensor decrea‐
ses the value and touching the  sen‐
sor increases it. The OK sensor is used
to activate the value.
Exiting a sub-menu
Select  to exit a sub-menu.



0:20
h