Miele T 1526 VENT ED DRYER Operation Manual

Vented dryer

Advertisement

Operations Manual
for the T 1526
Vented Dryer
ö
It is essential to read these
operating instructions before
installing or using the machine to avoid
the risk of accident, or damage
to the machine.
M.-Nr. 04 979 250

Advertisement

Table of Contents
loading

Summary of Contents for Miele T 1526 VENT ED DRYER

  • Page 1 Operations Manual for the T 1526 Vented Dryer ö It is essential to read these operating instructions before installing or using the machine to avoid the risk of accident, or damage to the machine. M.-Nr. 04 979 250...
  • Page 2: Table Of Contents

    Loading and unloading the machine ........8...
  • Page 3: Guide To The Machine

    Guide to the machine Guide to the machine Supply cable with plug Control panel Drum door Exhaust connection (left or rear) Four height-adjustable legs...
  • Page 4 – j ON / k OFF When the machine is turned on, the – DRYING STAGE REACHED “On” indicator will light up if the door is These indicator lamps show which closed. If the door is open, the drum drying stage the program has light will be on.
  • Page 5: Important Safety Instructions

    1. For your own safety and for the pro- 8. Clean the lint filter before and after tection of your machine read these each load. operating instructions carefully be- 9.
  • Page 6: Save These Instructions

    13.The interior of the machine and ex- haust duct should be cleaned pe- riodically by qualified personnel. 14.Do not reach into the dryer if the drum is moving. 15.Do not tamper with the controls. 16.Do not repair or replace any part of...
  • Page 7: Your Contribution To The Environment

    Disposal of the packing ma- Disposal of your old machine. terial. Old machines contain materials which can be recycled. Please contact your The packaging is mostly manufactured recycling center and render the ma- from the following recycled or re- chine inoperative as per the “Important useable materials: Safety Instructions”...
  • Page 8: Loading And Unloading The Machine

    Loading and unloading the machine Loading and unloading the machine If the wash is not removed at the end WARNING - To reduce the risk of of the drying program, the machine fire, electric shock, or injury to per- will automatically enter an anti- sons, read the IMPORTANT SAFETY crease cycle for 60 minutes.
  • Page 9: Notes On Laundry Care

    Notes on laundry care Notes on laundry care If fabric softening is desired, it is more Before drying, check the instructions convenient, economical and beneficial on the fabric care label. to the clothing if a liquid softener is The following fabrics should not be...
  • Page 10: Program Selection

    In addition, items can be either dried – Door for 20 minutes (incl. a cooling-cycle This button is used to open the door. lasting 8 mins.) or fluffed in cool air for 15 minutes. – ON/OFF When the machine is turned on, the “On”...
  • Page 11: To Select A Program

    Set the desired program by turning the program selector either clock- Open the door and load the machine. wise or counterclockwise. Close the door with a firm swing - do not push it shut. Press the "Start" button. If drying delicate fabrics, press the The program status will be stored for "Low temp."...
  • Page 12: Programs

    Cotton or linen fabrics, 15 lbs The laundry can be loosely Machine iron including starched laundry, rolled to prevent it from to be ironed on the rotary drying out until it can be iron, (B865E). ironed.
  • Page 13 Hand iron table cloths, pillowcases etc. cotton/synthetics, which are to be pressed. TIMED DRYING Individual items, e.g. This cycle will run for the warm comforters, or very small full 20 minutes, even if the loads. clothes are dry sooner. Items which you want to...
  • Page 14: Cleaning And Care

    Cleaning and care Cleaning and care Cleaning the lint filter Cleaning the dryer The lint is collected by the lint filter in Before cleaning the tumble dryer, the door. disconnect the machine from the Clean the filter after every program.
  • Page 15: Problem Solving Guide

    Problem solving guide Electrical appliances should only be repaired by qualified personnel. Incor- rectly repaired machines may put the user at risk. There are, however, minor problems which can be corrected without contacting the Service Department. What to do if, . . . ? Possible Cause .
  • Page 16 See next page..the interior drum light fails machine is turned on. The bulb to function? may be burnt out. See next page..you have to open the door in the event of a power failure?
  • Page 17 Problem solving guide The interior drum light fails to func- To open the door in the event of a tion: The bulb may be burnt out. power failure Replace it as follows: Turn off the machine or disconnect it from the power supply.
  • Page 18: After-Sales Service

    (see back cover for phone num- bers). When contacting the Service Depart- ment, please have the Model and Se- rial numbers of your appliance avail- able. Both of these can be found on the right side of the opened door. Sample:...
  • Page 19: Installation Instructions

    3 or 4 wire, 240 V - 30 Amp outlet, you can use the “Easy Installa- Warning tion Kit”, which allows you to use that line to connect this appliance.
  • Page 20: Installation

    The tumble dryer can also be placed on top of a Miele washing machine for a stacked installation. An appropriate stacking kit is required and can be obtained from your Miele The machine should be perfectly level dealer, or the Miele Parts Dept.
  • Page 21: Exhaust Venting

    - too many bends or angles - tight corners otherwise ..the drying results will be affected, . . . drying will take longer and use more energy. Materials suitable for venting: – rigid metal pipe –...
  • Page 22 90° 4’’ 14’’ Elbow 90° sharp; no radius 90° 90’’ Concertina bend 90° 8’’ 28’’ Wall vent kit with louvres, or window vent kit 142’’ Wall vent kit with flap, or window vent kit 99’’ Exhaust connection, left side 193’’...
  • Page 23 Exhaust connection, left ..193’’ Effective duct Internal diameter or Length (L) ....46’’ length (yds) edge length (inches) 0 - 13 4’’...
  • Page 24 9. Raised head screws (4 pcs.) 5. Flap 6. Screw The window vent kit is installed into in a plexi- 7. Wall anchor glass pane. If using an existing glass pane, cut a hole with a diameter of 4 15/16’’.
  • Page 25 INSTALLATION INSTRUCTIONS Fig. 1 Fig. 2 Ducting (side view) with flexible vent hose to an Height of vent outlet for washer/dryer stack. exhaust flue. 1. Wall vent duct A. Flexible ducting 2. Adapter 3. Flue insulated against dampness...
  • Page 26: Technical Data

    ’’-33 ’’) Width ......23 1/2" Depth (incl. distance from wall) ..
  • Page 27: Consumption Data

    The specified program running times and electrical consumption values were established under stand- ard conditions (EN 61121/A11). Different types of fabrics, load size and residual moisture after spinning may effect the specified values. *These values apply if the laundry is spun in a Miele washing machine before drying.
  • Page 28 All rights reserved/005 3101 These instructions are printed on 100% unbleached, recycled paper are completely Biodegradable.

This manual is also suitable for:

T1526 -

Table of Contents