Remove the adhesive tape
8
from the wheel rim.
Braking efficiency is im-
120
paired if the brake pads are
not correctly bedded against the
discs.
Before riding off, always check
that the brakes bite as soon as
the brake lever is pulled or the
brake pedal depressed.
Operate the brake several
times until the brake pads are
bedded.
z
The cable of the ABS
sensor could chafe through
if it comes into contact with the
brake disc.
Make sure that the ABS sensor
cable is routed snugly along the
front suspension.
Route ABS sensor cable 7 as
illustrated here.
Install screws 1 on left and
right.
Removing rear wheel
Make sure the ground is level
and firm and place the motor-
cycle on its centre stand.