BMW R 1200 RT Rider's Manual page 77

If you install the seat in the low
position, check that the seat's
rubber buffers 3 engage the
bottom mounts in the frame.
Firmly press the front seat into
the mount.
Install the rear seat (
Installing rear seat
Install the front seat (
OE
with seat heating
Connect plug 1.
75)
74)
If too much pressure is ap-
plied in the forward direc-
tion, there is a danger that the
motorcycle will be pushed off its
stand.
Always make sure that the
motorcycle is stable and firmly
supported.
Push the rear seat into the
holders in such a way that the
tongues engage the corres-
ponding holders.
Firmly press down on the rear
seat at the rear.
The rear seat engages with an
audible click.
4
75
z