Oil Level - BMW R 1200 RT Rider's Manual

the corresponding amount of fuel
4
used.
54 Resetting average
consumption
Switch on the ignition.
Select average consumption.
z
Press and hold down button 1.
Average consumption is reset
to zero.

Oil level

Oil-level indicator 1 gives you
an indication of the engine oil
level. You can call up this read-
ing only when the motorcycle is
at a standstill.
The preconditions for the oil level
check are as follows:
Engine at operating temperat-
ure.
Engine idling for at least 30
seconds.
Side stand retracted.
Make sure the motorcycle is
upright.
The readings mean:
Oil level is correct
Check the oil level with the
dipstick the next time you
stop for fuel. If you call up anoth-
er reading on the on-board com-
puter, this symbol remains visible
until the sensor again registers a
correct oil level.
Oil level cannot be meas-
ured (conditions as stated
above not satisfied).
The most recently measured
level is displayed for 5 seconds
when you next switch on the ig-
nition.
The oil-level sensor might
be defective if the "Check
oil level" message appears even
though the oil level in the oil
sight glass is correct. In this
case, consult your authorised
BMW Motorrad dealer.