Damping - BMW R 1200 RT Rider's Manual

ection indicated by the HIGH
4
arrow.
If you want to reduce spring
68
preload, turn knob 1 in the dir-
ection indicated by the LOW
arrow.
z
Basic setting of spring
preload, rear
Knob at "STD" mark on
scale at side (Rider weigh-
ing 85 kg, motorcycle fully
fuelled)
Install the rear seat (

Damping

Setting
Damping must be adapted to suit
the surface on which the motor-
cycle is ridden and to suit spring
preload.
An uneven surface requires
softer damping than a smooth
surface.
An increase in spring preload
requires firmer damping, a re-
duction in spring preload re-
quires softer damping.
Adjusting damping for
rear wheel
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
75)
There is a risk of injury
by burns if you adjust the
damping characteristic while the
silencer is hot.
Use a screwdriver extension and
wear protective gloves.
Adjust the damping character-
istic, using the tool from the
on-board toolkit to turn adjust-
ing screw 1.