Front-Wheel Stand - BMW R 1200 RT Rider's Manual

Align clamp 1 so that mark A
is in line with the mark on the
silencer and tighten the screw
to the specified torque.
Clamp to silencer and
manifold
55 Nm
Tighten screw 2 for the brack-
et of the silencer in the rear
footrest to the specified torque.
Silencer to footrest sys-
tem
19 Nm

Front-wheel stand

Installing front-wheel
stand
The BMW Motorrad front
wheel stand is not designed
to support motorcycles not fitted
with a centre stand or without
other auxiliary stands. A motor-
cycle resting only on the front
wheel stand and the rear wheel
can topple.
Place the motorcycle on its
centre stand or another auxiliary
stand before lifting the front
wheel with the BMW Motorrad

front-wheel stand.

Make sure the ground is level
and firm and place the motor-
cycle on its centre stand.
Use basic stand with tool num-
ber (0 402 241) in combina-
tion with front-wheel adapter
(0 402 242).
8
123
z