BMW R 1200 RT Rider's Manual page 129

Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Switch off the ignition.
Turn the handlebars to the
left to facilitate access.
Turn cover 1 counter-clock-
wise and remove it.
Remove the high-beam/low-
beam headlight bulb (
Install the high-beam/low-beam
headlight bulb ( 128)
Install cover 1.
Check that the bulb is cor-
rected seated (by looking in
through the headlight lens).
127)
Removing high-beam/low-
beam headlight bulb
Disconnect plug 1.
Disengage spring clip 2 at
left and right and secure it
8
127
z