BMW R 1200 RT Rider's Manual page 121

Threaded fasteners not
tightened to the specified
torque can work loose or their
threads can suffer damage.
Always have the security of the
fasteners checked by a specialist
workshop, preferably an author-
ised BMW Motorrad dealer.
Slip the spacing bushing into
the left-hand side of the wheel
hub.
Roll the front wheel into posi-
tion between the front forks.
Do not damage the ABS
sensor on the left-hand side
when rolling in the wheel.
Raise the front wheel, insert
quick-release axle 6 and tight-
en to specified torque.
Quick-release axle in axle
holder
50 Nm
Tighten axle clamping screw 5
to the specified torque.
Quick-release axle clamp
screws
19 Nm
Remove the front-wheel stand.
Ease the brake calipers on to
the brake discs.
Install securing screws 2 on
left and right and tighten to
specified tightening torque.
Brake caliper to slider
tube
30 Nm
8
119
z