Position left and right brake
8
calipers on the brake discs.
136
Install securing screws 4 on
z
left and right and tighten to
specified tightening torque.
Brake caliper on tele-
scopic fork
38 Nm
Remove the adhesive tape
from the wheel rim.
WARNING
Brake pads not lying against
the brake disc
Risk of accident due to delayed
braking effect.
Before driving, check that the
brakes respond without delay.
Operate the brake several
times until the brake pads are
bedded.
Seat the cable for the wheel-
speed sensor in retaining
clips 1 and 2.
Insert the wheel-speed sensor
into the bore and install
screw 3.
Wheel-speed sensor to
fork leg
Joining compound: Micro-
encapsulated or medium-
strength thread-locking com-
pound
8 Nm
Removing rear wheel
Make sure the ground is level
and firm and place the motor-
cycle on its centre stand.
Engage first gear.
CAUTION
Hot exhaust system
Risk of burn injury
Do not touch a hot exhaust
system.
Allow rear silencer to cool
down.