First-Time Use With Filter Cartridge Activation - Jura ENA MICRO 9 User Instructions

1 Preparing and using for the first time
Precondition: Bean container is filled.
T Insert the mains plug into a power socket.
Q T Press the On/Off button to switch the
machine on.
SPRACHE DEUTSCH
g T Turn the Rotary Switch until the required
language is displayed, for example
LANGUAGE ENGLISH
k T Press the Rotary Switch to confirm the
language setting.
, the language is set.
OK
/
FILTER p YES p
E Now decide whether you want to operate
your ENA with or without a CLARIS Blue
filter cartridge.
First-time use with filter cartridge
activation
k T Press the Rotary Switch.
OK
INSERT FILTER
T Remove the water tank.
T Open the filter holder.
T Insert the filter cartridge into the water tank,
exerting slight pressure.
36
.
k T Press the Rotary Switch.
c T Press the Maintenance button.
T Close the filter holder. It will click into place
audibly.
E After two months, the filter will cease to
work. Set the date on the date plate on the
filter holder in the water tank.
T Fill the water tank with fresh, cold water and
reinsert it.
T Place a receptacle (at least 500 ml) under the
hot-water and dual spout.
micro 9
FILTER RINSING
the hot-water spout.
E You can interrupt rinsing of the filter at any
time by pressing any button. Press the
Maintenance button c, to continue with
rinsing of the filter.
E The water may be slightly discoloured. This
is not harmful to health and does not affect
the taste.
Rinsing of the filter stops automatically.
SYSTEM FILLING
the dual spout.
,
HEATING PRESS RINSE
T Empty the receptacle and place it under the
dual spout.
, the system rinses itself. The
RINSING
operation stops automatically.
READY
, water flows out of
, water flows out of