First-Time Use With Filter Cartridge Activation; First-Time Use Without Filter Cartridge Activation - Jura ENA Micro 90 Instructions For Use Manual

E Now decide whether you want to operate
your ENA with or without a CLEARYL Blue
filter cartridge.
First-time use with filter cartridge
activation
T Press the Rotary Switch.
OK
INSERT FILTER
T Remove the water tank.
T Open the filter holder.
T Insert the filter cartridge into the water tank,
exerting slight pressure.
T Close the filter holder. It will click into place
audibly.
E After two months, the filter will cease to
work. Set the date on the date plate on the
filter holder in the water tank.
T Fill the water tank with fresh, cold water and
reinsert it.
INSERT FILTER
T Place a receptacle (at least 17 oz or 500 ml)
under the hot-water and dual spout.
1 Preparing and using for the first time
T Press the Rotary Switch.
FILTER RINSING
the hot-water spout.
E You can interrupt rinsing of the filter at any
time by pressing any button. Press the
Rotary Switch to continue rinsing of the
filter.
E The water may be slightly discolored. This is
not harmful to health and does not affect
the taste.
Rinsing of the filter stops automatically.
SYSTEM FILLING
the dual spout.
HEATING
READY
First-time use without filter cartridge
activation
T Turn the Rotary Switch until
NO -
is displayed.
T Press the Rotary Switch.
OK
16°dH
T Turn the Rotary Switch to change the water
hardness setting, e.g. to
T Press the Rotary Switch.
OK
FILL WATER TANK
T Remove the water tank.
T Fill the water tank with fresh, cold water and
reinsert it.
PRESS ROTARY
, water flows out of
, water flows out of
FILTER - /
25°dH .
11
de
en
fr
it
en
es
pt
ru