Filling The Water Tank; Preparation; Espresso, Coffee; Latte Macchiato, Cappuccino - Jura ENA MICRO 9 User Instructions

Hide thumbs Also See for ENA MICRO 9:
Table of Contents

Advertisement

2 Preparation

< T Press the Espresso button to start prepara-
tion.
T Turn the grinder adjustment switch to the
desired position while the grinder is
running.
The preset amount of water flows into the
cup. Preparation stops automatically.
READY

Filling the water tank

Daily maintenance of the machine and hygiene
when handling milk, coffee and water are key to a
perfect coffee result in the cup every time. You
should therefore change the water daily.
CAUTION
Milk, sparkling mineral water or other liquids can
damage the water tank or the machine.
T Only fill the water tank with fresh, cold water.
T Remove the water tank and rinse with cold
water.
T Fill the water tank with fresh, cold water and
reinsert it.
2 Preparation
E You can interrupt preparation at any time
while a speciality coffee, speciality coffee
with milk or hot water is being prepared.
Just press any button.
E Before and during the grinding operation
you can select the coffee strength of
espresso <, coffee >, cappuccino / and
latte macchiato ( :
38
,
NORMAL
STRONG
E During preparation, you can change the
preset amounts (e.g. amount of milk foam
or water) by turning the Rotary Switch g.
E You can follow the current status of
preparation on the progress bar.
Coffee tastes best served hot. A cold porcelain cup
cools the beverage – and impairs the taste. We
therefore recommend prewarming the cups. The
full coffee aroma can develop only in prewarmed
cups. You can purchase a JURA cup warmer from
your specialised dealer.
You can make permanent settings for all products
in programming mode (see Chapter 4 'Permanent
settings in programming mode – Products').

Espresso, coffee

Preparation of espresso < and coffee > follows
this model.
Example: Proceed as follows to prepare one coffee.
Precondition:
READY
T Place a cup under the dual spout.
> T Press the Coffee button to start preparation.
COFFEE
flows into the cup.
Preparation stops automatically.
READY

Latte macchiato, cappuccino

Your ENA can prepare a latte macchiato or
cappuccino at the touch of a button. There is no
need to move the glass or cup.
Preparation of latte macchiato ( and cappuccino /
follows this model.
Example: Proceed as follows to prepare one latte
macchiato.
Precondition:
READY
T Place a glass under the dual spout.
T Remove the protective cover of the dual
spout.
T Connect the milk pipe to the dual spout.
.
is displayed.
, the preset amount of water
is displayed.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Enamicro 9one touch

Table of Contents