Hot Water; Daily Operation; Switching On The Machine; Daily Maintenance - Jura ENA MICRO 9 User Instructions

Hide thumbs Also See for ENA MICRO 9:
Table of Contents

Advertisement

3 Daily operation

The preparation of coffee, espresso, cappuccino
and latte macchiato with ground coffee follows
this model.
Example: Prepare a cup of coffee using ground
coffee.
Precondition:
READY
T Place a cup under the dual spout.
T Open the powder chute for ground coffee.
FILL POWDER
T Place the filler funnel for ground coffee on
the powder chute.
T Place one level measuring spoon of ground
coffee into the filler funnel.
T Close the powder chute for ground coffee.
SELECT BUTTON
> T Press the Coffee button to start preparation.
, the preset amount of water
COFFEE
flows into the cup.
Preparation stops automatically.
READY

Hot water

J
CAUTION
There is a danger of scalding from hot water
splashes.
T Avoid direct contact with the skin.
Precondition:
READY
T Place a cup under the hot-water spout.
m
T Press the Hot Water button.
, the preset amount of water flows
WATER
into the cup.
Preparation stops automatically.
READY
40
is displayed.
is displayed.
3 Daily operation

Switching on the machine

Daily maintenance of the machine and hygiene
when handling milk, coffee and water are key
to a perfect coffee result in the cup every time.
You should therefore change the water daily.
T Place a receptacle under the dual spout.
Q T Press the On/Off button to switch the
machine on.
HEATING
, the system rinses itself.
RINSING
The operation stops automatically.
READY

Daily maintenance

To ensure that you get many years of reliable
service out of your ENA and to guarantee the
optimum coffee quality, the machine requires
daily maintenance.
T Remove the drip tray.
T Empty the coffee grounds container and
drip tray and rinse with warm water.
T Reinsert the coffee grounds container and
the drip tray.
T Rinse the water tank with clean water.
T Dismantle and rinse the dual spout (see
Chapter 5 'Maintenance – Dismantling and
rinsing the dual spout').
T Wipe the surface of the machine with a
clean, soft, damp cloth (e.g. microfibre
cloth).
E In the interests of hygiene, we recommend
changing the milk pipe on a regular basis
(approx. every 6 months). Replacement
pipes are available from specialised dealers.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Enamicro 9one touch

Table of Contents