Changing The Filter - Jura ENA MICRO 9 User Instructions

Hide thumbs Also See for ENA MICRO 9:
Table of Contents

Advertisement

k T Press the Rotary Switch to confirm the
setting.
OK
INSERT FILTER
T Remove and empty the water tank.
T Open the filter holder.
T Insert the filter cartridge into the water tank,
exerting slight pressure.
T Close the filter holder. It will click into place
audibly.
E After two months, the filter will cease to
work. Set the date on the date plate on the
filter holder in the water tank.
T Fill the water tank with fresh, cold water and
reinsert it.
T Place a receptacle (at least 500 ml) under the
hot-water spout.
c T Press the Maintenance button.
FILTER RINSING
the hot-water spout.
E You can interrupt rinsing of the filter at any
time by pressing any button. Press the
Maintenance button c, to continue with
rinsing of the filter.
E The water may be slightly discoloured. This
is not harmful to health and does not affect
the taste.
Rinsing of the filter stops automatically.
HEATING
READY
The filter is now activated.

Changing the filter

Precondition:
c T Press the Maintenance button.
, water flows out of
k T Press the Rotary Switch.
E After 50 litres of water have flowed through,
the filter will cease to work. Your ENA will
automatically prompt you to change the
filter.
E After two months, the filter will cease to
work. Set the date on the date plate on the
filter holder in the water tank.
E If the CLARIS Blue filter cartridge is not
activated in programming mode, you will
not be prompted to change the filter.
/
FILTER
INSERT FILTER
T Remove and empty the water tank.
T Open the filter holder and remove the old fil-
ter cartridge.
T Insert a new filter cartridge into the water
tank, exerting slight pressure.
T Close the filter holder. It will click into place
audibly.
T Fill the water tank with fresh, cold water and
reinsert it.
T Place a receptacle (at least 500 ml) under the
hot-water spout.
FILTER RINSING
the hot-water spout.
E You can interrupt rinsing of the filter at any
time by pressing any button. Press the
Maintenance button c, to continue with
rinsing of the filter.
5 Maintenance
is displayed.
READY
, water flows out of
47
de
en
fr
it
nl
es
pt
ru

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Enamicro 9one touch

Table of Contents