Setting The Water Hardness; Energy-Saving Mode; Automatic Switch-Off - Jura ENA MICRO 9 User Instructions

4 Permanent settings in programming mode

Setting the water hardness

E If you are using the CLARIS Blue filter
cartridge and have activated it in program-
ming mode, you will not be able to adjust
the water hardness.
The harder the water is, the more frequently the
ENA needs to be descaled. It is therefore important
to adjust the water hardness.
The water hardness can be adjusted on a continu-
ous scale between 1° dH and 30° dH.
Example: Change the water hardness setting from
to
16°dH 25°dH
Precondition:
READY
k T Press and hold the Rotary Switch until
appears.
RINSE
g T Turn the Rotary Switch until
is displayed.
k T Press the Rotary Switch to enter the
programme item.
16°dH
g T Turn the Rotary Switch until
displayed.
k T Press the Rotary Switch to confirm the
setting.
, the water hardness is set.
OK
HARDNESS
g T Turn the Rotary Switch until
displayed.
k T Press the Rotary Switch to exit programming
mode.
READY

Energy-saving mode

The energy-saving mode (Energy Save Mode,
©
E.S.M. ) helps you to prevent your machine from
consuming power unnecessarily and to actively
save energy:
U
ENERGY p
U
Soon after the last preparation, the ENA
stops heating up. After about 5 minutes the
message
ENERGY ON
42
.
is displayed.
HARDNESS
25°dH
is
EXIT
is displayed.
U
Before you can prepare a speciality coffee,
speciality coffee with milk, or hot water, the
machine must heat up.
U
ENERGY -
U
The ENA is constantly ready for use.
U
All speciality coffees as well as hot water can
be prepared without having to wait.
Example: Change the energy-saving mode from
ENERGY p
Precondition:
k T Press and hold the Rotary Switch until
RINSE
g T Turn the Rotary Switch until
displayed.
k T Press the Rotary Switch to enter the
programme item.
ECONOMY p
g T Turn the Rotary Switch until
is displayed.
k T Press the Rotary Switch to confirm the
setting.
, the energy-saving mode is set.
OK
is
ENERGY -
g T Turn the Rotary Switch until
displayed.
k T Press the Rotary Switch to exit programming
mode.
READY

Automatic switch-off

By instructing your ENA to automatically switch
itself off, you can cut down your energy consump-
tion. If this function is activated, your ENA switches
off automatically after the preset time following
the last action on the machine.
The automatic switch-off can be set to between
15 minutes and 9 hours.
Example: Change the switch-off time from
to
2 HRS
Precondition:
k T Press and hold the Rotary Switch until
RINSE
to .
ENERGY -
is displayed.
READY
appears.
.
1 HRS
is displayed.
READY
appears.
is
ENERGY p
ECONOMY -
is
EXIT