X-Over Sub-Menu; Load A Xover; Design A Xover; Store A Xover - PROEL DSO26 User Manual

DSO26 User Manual

X-OVER SUB-MENU

Load a Xover

Loads a stored crossover from the selection available. Enter accepts the selected name
and loads immediately.

Design a Xover

Opens a wizard to design a crossover. Options include format type, ganging of outputs,
routing and automatic limiter time constants. The table below outlines which options are
available dependant on what type of crossover is chosen for the design.
2 x 2 Way
Gang
Outputs:Yes/No
Auto Limit
TC:Yes/No

Store a Xover

Stores a X-over (all output settings) to one of 9 locations. Crossovers can be named, using
the same method as memories, with up to 16 characters which appear in the default
screen on the top line of the display.

Erase a Xover Mem

Permits clearing (erasing) of individual crossover memories from the unit. Note that, once
erased, the memory name disappears from the list of recallable locations. If the crossover
memory is currently in use, it's name will remain on the default screen, and the current
settings will not be changed.
2 x 3 Way 4 Way
Out 5
Source:A/A+B
Gang Out 6
Outputs:Yes/No Source:A/A+B
Auto Limit Auto Limit
TC:Yes/No TC:Yes/No
5 Way
Out 6
Source:A/A+B
Auto Limit
TC:Yes/No
26
6 Way
Auto Limit
TC:Yes/No