High And Low Pass Filter Screens - PROEL DSO26 User Manual

DSO26 User Manual

High and Low Pass Filter Screens

Each output has an independent high pass filter and an independent low pass filter. Both
filters have a range of selectable slopes, which are Bessel 12dB, 18dB and 24dB,
Butterworth 12dB, 18dB and 24dB, and Linkwitz-Riley 24dB.
Highpass filters have a range of <10Hz (through) to 16kHz and Lowpass filters have a
range of 22kHz (through) to 39Hz in 1/36 octave steps.
HPFs and LPFs can be set asymmetrically.
For further details on this topic, see the section entitled "Crossover Filter Slopes"
on page 32.
To adjust HPF/LPF settings:
Use the 'FREQ' control for the frequency.
Use the 'SLOPE' control for the slope.
21