Front Panel Familiarisation - PROEL DSO26 User Manual

DSO26 User Manual

FRONT PANEL FAMILIARISATION

Next Key : moves forwards through the list of available parameters.
Back Key : moves back through the list of available parameters.
Menu Key : activates the main menu. A second press selects the last
menu edited. Selection of different menus may be accomplished using the
Back and Next keys, or by turning the 'Freq' encoder.
Enter Key : enters the chosen menu and confirms choices.
Bypass Key : bypasses the currently selected parametric EQ section.
Note that, for safety reasons, the high and low pass filters cannot be bypassed using this
key.
Quit Key : exits the menu.
Gain Keys : one for each input and output, allowing instant access to
the gain screen for the selected channel.
Input Meters : display available headroom below clipping. The yellow
'-6dB' LED illuminates at 6dB below the actual clipping point of the input
section. The red 'Clip' LED shows digital overflow and can therefore
illuminate independently of the rest of the meter.
Encoders : three velocity sensitive controls allow the relative
parameter displayed on the LCD screen to be adjusted.
Output Meters: display headroom below limiting. The yellow
LED illuminates 3dB below limiting for that channel. The red
LED indicates the onset of limiting.
Mute Keys: mutes the appropriate channel, and illuminates
the associated LED.
LCD Screen: shows menu options, channel
information, and various parameters as they are
adjusted.
9