Table of Contents
Advertisement
1. U-profile
2. Lever of emergency door opening
4.4. TRANSPORTING BRACES
Dismantle the rear cover. Before complete removal of the rear panel it is necessary to disconnect the ventilation
hose of the machine. It means loosen the hose clip and pull the rubber hose off the plastic socket.
There are two striking colour transporting braces which must be removed before putting the machine into
operation. Transporting braces (2) are at the drum axis level on the left and right. Each of them is fastened
with two bolts (1) on the external side of cabinet and with one nut (3) on the bolt holding the external drum.
After dismantling braces screw on the bolts (1) back to the cabinet. Keep the braces (2) for possible future
transportation. When installing the rear cover again, don´t forget to put the rubber hose back on the plastic
socket and secure it with the hose clip.
1. Bolt joint of the brace
2. Transporting brace
3. Nut of the brace
516574
PUBLICATION DATE Jan 06
Fig.4.3. Bottom machine frame
Fig.4.4. Transporting braces
INSTALLATION AND MAINTENANCE MANUAL
7
Hide quick links:
Advertisement
Table of Contents
