Table of Contents
Advertisement
6.10. FAILURE LED IS FLASHING
– the second digital line indicates the error code which is stated in the programming manual
6.11. DOOR FAILS TO OPEN
In case of a power failure or an emergency situation, proceed as follows:
1. before the door is open, check the washing bath and machine parts temperature.
WARNING !
!
IF TOO HOT DO NOT OPEN! RISK OF BURN OR SCALD INJURIES !
KEEP CHILDREN OFF WHEN THE MACHINE IS IN OPERATION !
When the washing bath is cooled down, find the bolt (fig.6.11.,pos.2) for access to a lever of emergency
door opening on the left bottom side (1) and unscrew it. Pull the lever by a screwdriver (4 mm diameter)
trough the hole in the frame, to open the door.
WARNING !
!
IF THE WASHING WATER WAS NOT DRAINED OFF, IT WILL RUN OUT THROUGH THE DOOR
OPENING !
16
Fig. 6.11. Lever of emergency opening the door.
INSTALLATION AND MAINTENANCE MANUAL
PUBLICATION DATE Jan 06
516574
Hide quick links:
Advertisement
Table of Contents
