Sennheiser Tourguide System 2020 Instruction Manual page 98

Tourguide2020_516509_0909_Sp6.book Seite 30 Montag, 22. März 2010 1:12 13
Using the components
²
30
Automatically switching the HDE 2020 D on/off
The receiver automatically switches on when you pull
the earbows
When you release the earbows, the receiver switches
to standby mode (audio deactivated) and then
switches off after 2minutes.
»
Switching the EK 2020 D on/off
You can connect an induction loop or any pair of head-
´
phones with a 3.5 mm mono or stereo jack plug to the
headphone socket
phone impedance must be 32 Ω or higher.
Connect the 3.5 mm jack plug of your headphones
»
to the headphone socket of the EK 2020 D.
To switch the receiver on:
Briefly press the ON/OFF button
The display
To switch the receiver off:
Press the ON/OFF button
When you unplug the headphones from the receiver
or switch off the transmitter, the receiver automati-
cally switches off after 5 minutes.
Switching the charging case on/off
To switch the charging case on:
Set the mains switch
POWER ²
The LED
To switch the charging case off:
Set the mains switch
POWER ²
The LED
³ »
apart. The display
²
of the EK 2020 D. The head-
»
switches on.
´
for 3 seconds.
to the position "I".
lights up.
to the position "0".
goes off.
switches on.
´
.