Special Bodypack Transmitter/Radio Microphone Settings - Sennheiser Tourguide System 2020 Instruction Manual

Tourguide2020_516509_0909_Sp6.book Seite 40 Montag, 22. März 2010 1:12 13
Using the components
40
Special bodypack transmitter/radio
microphone settings
The following special settings can only be made via
the bodypack transmitter's/radio microphone's oper-
ating menu. An overview of this operating menu is
given from page 49 onwards.
Switching the bodypack transmitter's line
input on/off
You can connect an audio source such as a CD player,
MP3 player, etc. to the bodypack transmitter's line
input. If you have connected an audio source, you then
have to switch on the line input as follows:
button µ.
Press the SET
The operating menu appears and the first menu
item "CHAN" flashes on the display.
Repeatedly press the
direction until "LINE" flashes on the display.
button µ.
Press the SET
If the line input is switched off, "LINE.OFF" flashes
on the display; if the line input is switched on,
"LINE.ON" flashes on the display.
Press the / rocker button
setting.
Press the SET button
setting.
"STORED" briefly appears on the display.
Adjust the sensitivity of the line input to match the
connected audio source as described in the follow-
ing section.
¾
/ rocker button
¾
to change the
µ
to permanently store the
in the