Indications And Displays On The Bodypack Transmitter - Sennheiser Tourguide System 2020 Instruction Manual

Tourguide2020_516509_0909_Sp6.book Seite 15 Montag, 22. März 2010 1:12 13
CH 03
LINE
MIC
Indications and displays on the
bodypack transmitter
Operation and battery status indication
LOW BATT/MUTE ¶
The red LED
on the current operating state of the bodypack trans-
mitter:
Red LED off:
The bodypack transmitter is switched on and the capa-
city of the batteries/BA 2015 accupack is sufficient.
Red LED flashing:
The batteries are/the BA 2015 accupack is going flat
(LOW BATT).
In addition, the 4-step battery status display
display panel provides information on the remaining
battery/BA 2015 accupack capacity:
3 segments
2 segments
1 segments
Battery icon flashing
AF peak indication
PEAK º
The yellow LED
mitter's audio input is overmodulated.
If the transmitter's audio input level is excessively
high, the sound of the receivers may be distorted.
º
In order to avoid distortion in the receivers, reduce
the sensitivity of the transmitter's line and/or micro-
phone input (see "Changing the sensitivity of the
bodypack transmitter's line input" on page 41 and
"Changing the sensitivity of the bodypack transmit-
ter's microphone input" on page 42).
The operating controls
provides information
capacity approx. 100%
capacity approx. 70%
capacity approx. 30%
LOW BATT
lights up when the trans-
on the
15