Sennheiser Tourguide System 2020 Instruction Manual page 104

Tourguide2020_516509_0909_Sp6.book Seite 36 Montag, 22. März 2010 1:12 13
Using the components
36
Make sure that the lock mode is deactivated
(see "Activating/deactivating the lock mode" on
page 45).
LOW BATT
ON/OFF ON/OFF
Bodypack transmitter
Press the SET button.
The operating menu appears and the first menu
item "CHAN" flashes on the display.
Press the SET button.
The current channel flashes on the display.
Press / to change the channel.
If you press , the display jumps to the next
channel; if you press
previous channel.
By pressing and holding the
display cycles continuously (repeat function).
Press the SET button to permanently store the
selected channel.
"STORED" briefly appears on the display. The body-
pack transmitter or the radio microphone now
transmits on the selected channel. The last menu
item selected is shown on the display.
To exit the operating menu:
Use / to select the "EXIT" menu item and press
the SET button.
The standard display is shown.
Or:
Press and hold the
ard display is shown.
MUTE
PEAK
SET SET
Radio microphone
, the display jumps to the
/ buttons, the
ON/OFF button until the stand-