Sennheiser Tourguide System 2020 Instruction Manual page 109

Tourguide2020_516509_0909_Sp6.book Seite 41 Montag, 22. März 2010 1:12 13
CH 03
LINE
MIC
Changing the sensitivity of the bodypack
transmitter's line input
To adjust the sensitivity of the line input to match the
connected audio source:
Make sure that the line input is switched on (see
previous section).
Connect the external audio source, switch it on and
start playback.
button µ.
Press the SET
The operating menu appears and the first menu
item "CHAN" flashes on the display.
Repeatedly press the
"SENSIT" flashes on the display and the
display appears.
button µ.
Press the SET
The current input sensitivity and the
display appear on the display.
Press the / rocker button
input sensitivity so that the LINE level display
shows full deflection during the loudest passages,
but the yellow LED
manently.
Press the SET button
setting.
"STORED" briefly appears on the display, indicating
that the sensitivity of the line input has been
stored.
Using the components
/ rocker button
LINE
LINE
¾
to change the
PEAK º
does not light up per-
µ
to permanently store the
¾
until
level
level
41