Sennheiser Tourguide System 2020 Instruction Manual page 95

Tourguide2020_516509_0909_Sp6.book Seite 27 Montag, 22. März 2010 1:12 13
Putting the components into operation
Note:
Always charge the accupack in the charging
³
compartment of the charging case (see "Charg-
ing the BA 2015 accupack" on page 33).
Inserting and replacing the batteries/accupack of
the bodypack transmitter
For powering the bodypack transmitter, you can
either use the rechargeable BA 2015 accupack
two 1.5 V AA size batteries. NB: Do not use any other
rechargeable batteries!
Push the two battery compartment catches
open the battery compartment cover ¿.
Insert the BA 2015 accupack
shown in the diagram on the left. Please observe
correct polarity when inserting the accupack/
batteries.
Close the battery compartment cover ¿.
Connecting a microphone to the bodypack
transmitter
Note:
Suitable Sennheiser microphones are listed on
page 8.
Connect the microphone to the microphone
»
input of the bodypack transmitter.
Lock the plug by screwing down the coupling ring.
Adjust the sensitivity of the microphone input as
described on page 42.
´
or
and
´
or the batteries as
27