Indications And Displays On The Charging Case - Sennheiser Tourguide System 2020 Instruction Manual

Tourguide2020_516509_0909_Sp6.book Seite 21 Montag, 22. März 2010 1:12 13
¶
´
µ
Indications and displays on the charging
case
Operation indication
POWER ²
The LED
supply is switched on.
Temperature indication
TEMP ERROR ¶
The LED
the charging case gets too high and will remain on
²
until the temperature drops to a safe level. All charg-
ing processes are interrupted until the temperature
drops to a safe level.
LED indication for "automatic copying" function
COPY AVAILABLE º
The LED
the "automatic copying" function is available. This
happens
• when a switched-on receiver is placed into the
charging compartment
function (master)
• and at least one receiver is placed into one of the
other receiver charging compartments (slaves,
light blue in the diagram) ´.
COPY AVAILABLE º
The LED
matic copying" function is not available. This happens
• when the receiver in the charging compartment
with channel copy function (master)
off,
• or when the receiver is removed from the charging
compartment
(master) µ,
• or when all 19 charging compartments (slaves)
are empty.
The operating controls
lights up as long as the mains
lights up if the temperature in
lights up green when
with channel
µ
goes off when the "auto-
µ
with channel copy
copy
is switched
function
´
21