Sennheiser Tourguide System 2020 Instruction Manual page 110

Tourguide2020_516509_0909_Sp6.book Seite 42 Montag, 22. März 2010 1:12 13
Using the components
CH 03
LINE
MIC
42
Changing the sensitivity of the bodypack
transmitter's microphone input
To adjust the sensitivity of the microphone input to
match the connected microphone:
Connect the microphone, position it correctly (refer
to the microphone's instruction manual) and speak
into the microphone as usual.
button µ.
Press the SET
The operating menu appears and the first menu
item "CHAN" flashes on the display.
Repeatedly press the
"SENSIT" flashes on the display and the
display appears.
button µ.
Press the SET
The current input sensitivity and the
display appear on the display.
Press the / rocker button
input sensitivity so that the
shows full deflection during the loudest passages,
but the yellow LED
permanently.
Press the SET button
setting.
"STORED" briefly appears on the display, indicating
that the sensitivity of the microphone input has
been stored.
¾
/ rocker button
MIC
MIC
¾
to change the
MIC level display
PEAK º
does not light up
µ
to permanently store the
until
level
level