Which Outgoing/Incoming Call Features Do I Have - Toshiba STRATA CTX DKT3000 User Manual

The Basics
Important - Read First

Which Outgoing/Incoming Call Features Do I Have?

Check mark here which outgoing/incoming features you have on your system.
❐
Automatic Line Selection (ALS): When making outgoing calls, you have ALS if
when you lift the handset or press
Emitting Diode (LED) lights steady green. The LCD displays the station number
and the seized outside line.
❐
Ringing Line Preference: You answer an incoming line ringing your station by
lifting the handset or pressing
to answer.
❐
Tone Signaling: Internal incoming call – you hear successive ring tones, then lift
the handset or press
❐
Voice First Signaling: Internal incoming call – your telephone does not ring;
instead you hear a long tone, then the caller's voice. Talk in the direction of your
telephone, or answer the call as you normally would by lifting the handset or
pressing
❐
Switching Signaling: Check with your CTX System Administrator to see if you
have the ability to change between Tone and Voice Signaling on a call-by-call
basis. If you do, you can press
change the signaling.
❐
Hot Dialing: If your telephone is programmed for "hot dialing," you do not have
to press
calls. When you dial a number, the speakerphone automatically turns on and the
Spkr and Mic LEDs light.
8
to answer the call.
.
after dialing an internal telephone number to
or lift the handset before dialing internal or external speakerphone
you hear dial tone and the Line Light
. You do not have to press an extension button
Strata CTX DKT3000/2000-Series Telephone 05/02