Network - Speco VIP2PTZ12X User Manual

• New Server Time: Select your time zone from the drop-down list. If you want the server
clock to automatically adjust for daylight saving time, select "Automatically adjustment for
daylight saving time changes".
From the Time mode section, select the preferred method to use for setting the time:
- Synchronize with computer time: Sets the time from the clock on your computer.
- Synchronize with NTP server: The network camera will obtain the time from an NTP
server every 60 minutes.
- Set manually: This option allows you to manually set the time and date.
NOTE: If using a host name for the NTP server, a DNS server must be configured under
TCP/IP settings.

4) Network

Settings in regard to network can be executed. Settings for IP, DNS, Host Name, Port, and
ARP/Ping can be established, along with setting for DDNS, uPnP, QoS, Zeroconfig and
Bonjour.
Basic
• IP Address Configuration:
- Obtain IP address via DHCP: Dynamic Host Configuration Protocol (DHCP) is a
protocol that lets network administrators centrally manage and automate the
assignment of IP addresses on a network. DHCP is enabled by default. Although a
DHCP server is mostly used to set an IP address dynamically, it is also possible to use
it to set a static, known IP address for a particular MAC address.
51