Speco VIP2PTZ12X User Manual page 33

• • • • Pre-Viewer: Motion detection windows are configured by Motion or Mask windows. Each
window can be selected by clicking with the mouse. It is also possible to resize, delete or
move the window, by selecting the appropriate window at the mouse menu on the video
screen.
To create a motion or mask window, follow these steps:
1. Click the right button of mouse to see the mouse menu.
2. Select New Motion (or New Mask) from the mouse menu.
3. Click and drag mouse to designate a motion area.
• • • • Motion Detection Setting: The behavior for each window is defined by adjusting the
Threshold and Sensitivity, as described below.
A motion index is a set of parameters describing Window Name, Type, Threshold and Dwell
Time. Window Types is one of Motion and Mask windows.
- Threshold: Sets up the threshold for the motion detection.
- Dwell Time: Sets the hold time an event lasts for the specified hold time from the point of
detection of a motion.
You can also modify or delete a motion index. Select an index and then, click the Modify or
Delete button.
Select "Enable" to activate the motion window.
Network Loss
This is used to trigger the event every time the network connection fails. Select "Enable" to
activate the Network Loss event.
33