Speco VIP2PTZ12X User Manual page 37

• • • • HTTP Server Setting:
- Name: The name of the HTTP event server. Use a descriptive name.
- URL: The network address to the server and the script that will handle the request.
For example: http://192.168.12.244/cgi-bin/upload.cgi
- User name/Password: Provide your log-in information.
• • • • HTTP Server Test: When the setup is complete, the connection can be tested by clicking
the Test button.
Alarm Out
• • • • Enable alarm out: Click the Enable alarm out checkbox to enable the Alarm Out port.
- Type: The default setting is NO.
* NO: Normally Open
* NC: Normally Close
Click the Save button to save the settings, or click the Reset button to clear all of the
information you entered without saving it.
37