Quick Installation Guide; Connect Pc And O2B2 To Network; Install Speco-Nvr - Speco O2B2 User Manual

O 2 B 2 U s e r ' s G u i d e
O 2 B 2 U s e r ' s G u i d e

4.2. Quick Installation Guide

4.2.1. Connect PC and O2B2 to network.

1. Prepare a PC to run programs for the installation and video connection
(PC is needed to assign IP address to O2B2)
2. In the case of using PoE, connect the PC and O2B2 to the network using one of the following ways.
If your LAN Switch does not support standard PoE, connect
The DC power is applied through DC

4.2.2. Install Speco-NVR

Speco-NVR is a multi-channel VMS program for the IP camera. Install Speco-NVR on remote PC to connect to
these products. It is needed to assign connection information to Speco-NVR program before connection.
Insert the CD provided with product into the PC and install Speco-NVR.
adapter.
LAN switch
LAN switch with
standard POE
(802.3af)
Figure 4-1. Power and network connection
O2B2 as shown in dotted line in Figure 4-1.
DC adapter
Rev.1.11 (Mar. 2014)
16