Rs485; View Angle - Speco VIP2PTZ12X User Manual

4) RS485

• RS485 Setting:
- DOME ID: Enter identification number for external PTZ device. The DOME ID can be
adjusted in the range 1 ~ 3999.
- Protocol: Selects PTZ protocol to communicate with external PTZ device.
- Baud rate: Selects one of the Baud rate.
- Parity: Selects one of the Parity bit.

5) View Angle

• View Angle Setting:
- Tilt angle limit: This option is designed to limit the view angle as there is some obstruction
in zooming out on specific areas of the tilt angle.
NOTE: Focus issues may occur if the tilt angle limit is set below 10 degree.
45