Network Connection & Ip Assignment - Speco VIP2PTZ12X User Manual

2.4 Network Connection & IP assignment
The camera supports the operation through the network. When a camera is first connected to the
network, it is necessary to allocate an IP address to the device with the "SpecoManager" utility on
the CD. (Default DHCP)
1) Connect the network camera/device to the network and power up.
2) Start SpecoManager utility (Start > All programs > SpecoManager > SpecoManager). The
main window will display, and after a short while any network devices connected to the
network will be displayed in the list.
3) Select the camera on the list and click right button of the mouse. You can see the pop-up
menu as below.
4) Select Assign IP Address. The Assign IP window will display. Enter the required IP address.
NOTE: For more information, refer to the SpecoManager User's Manual.
13