Gateway Notebook Hardware Reference Manual page 43

www.gateway.com
Tips & Tricks
Be careful not to break off the tabs
located on the bottom of the cover. Slide
the cover in the direction shown. If the
cover does not slide easily, wiggle the
cover to loosen it.
Disconnect all peripheral devices and remove any PC cards.
5
Unplug from the optional port replicator from the notebook.
6
Turn your convertible notebook over so the bottom is facing up, then
7
remove the main and optional multibay battery. For more information, see
"Changing batteries" on page
Loosen the six memory bay cover screws that secure the memory cover.
8
(These screws cannot be removed.)
Remove the memory bay cover.
9
If you are removing a module, gently press outward on the clip at each
10
end of the memory module until the module tilts upward.
Clip
34.
Screw
Screw Screw
Screw
Adding or replacing memory
Screw
Screw
39
Clip