Advertisement
15
FUNCTION TEST - continued
Remote Engine Start Functions
1. REMOTE ENGINE START; Make sure the key is removed from the ignition switch and the engine hood is
closed. Press the START button (2) times - The parking lights should flash three times, the horn should beep
once the driver's door should unlock and then re-lock then the vehicle should crank and start. Once started the
parking lights will turn on and stay on signifying the vehicle is started.
2. RUNNING WITH IGNITION KEY; While the vehicle is running on the remote engine start, press the UNLOCK
Button and enter the vehicle, insert the ignition key and turn the ignition to the run position, press the
brake pedal - At this time the vehicle should be running on the ignition key and the remote engine start
was shut down when the brake pedal was pressed. Turn off the ignition switch and the vehicle should
shut off.
3. BRAKE PEDAL SAFETY; Restart the vehicle using the remote engine start, press UNLOCK button and enter
the vehicle, press the brake pedal - The vehicle should shut off.
4. KEY-IN -SENSE; Insert the ignition key into the ignition switch but keep in off position, activate the remote
engine start function - the vehicle should flash the lights as if it is going to start but then the remote engine
starter does not attempt to start the vehicle since it senses the key in the ignition.
5. HOOD SAFETY SWITCH; Open the engine hood and activate the remote engine start function - The horn
should beep two additional times signifying that hood safety switch is tripped and the vehicle will not start.
Car Find®
1. Press and hold the START button for more than (1) second - The horn should beep five times and parking lights
should flash five times.
FUNCTIONAL TESTING IS NOW COMPLETE.
15
1030832 Rev.A 10/05
Advertisement
