Yamaha CLP- 585 Owner's Manual page 94

System Menu
 Backup Setting
(Selecting parameters maintained even when the
power is turned off)
This lets you set whether some settings of the Backup
Setting (below) are maintained or not when the power
is turned off. The Backup Setting consists of two
groups, "Voice" (including Voice related settings such
as Voice selection) and "Other" (including various
settings such as Song Repeat and Tuning), which can
be set individually.
Data maintained even when the power is
turned off
• User MIDI Song (saved in this instrument's
"User" memory)
• Utility
• Backup Setting (explained here)
1.
Press the [MENU] button several times to
select "System Menu."
2.
Use the [ ]/[ ] buttons to select "Backup,"
use the [>] button to call up the next display,
then use the [ ]/[ ] buttons to select
"Backup Setting."
3.
Use the [>] then the [ ]/[ ] buttons to select
"Voice," then use the [>] button to select "On"
or "Off."
Each "Voice" contains the following settings:
• Voice selection for R1, R2 and L
• On/off status for the Dual/Split.
• All the parameters other than Split Point in the Voice
Menu
4.
Use the [ ]/[ ] buttons to select "Other,"
then use the [>] button to select "On" or
"Off."
The "Other" contains the following settings:
• In the Voice Menu: Split Point
• In the Song Menu: Song Repeat, Song-Keyboard,
Audio Volume, Quick Play, Play Track
• In the Metronome Menu: Volume, BPM, Bell On/Off,
Intro, Ending
• In the System Menu: Tuning, Keyboard, Pedal, Sound,
MIDI
5.
Press the [EXIT] button to exit from the
System Menu display.
94
CLP-585/575/545/535/565GP Owner's Manual
 Backup
(Saving the Backup file for internal data)
This lets you save data on internal memory to the
connected USB flash memory as a backup file (named
"clp-***.bup"). This backup file can be loaded to the
instrument via the Restore function (page 95) for
future.
NOTICE
• It may take 1 – 2 minutes to complete this operation. Never turn
off the power during this operation (while "Executing" is shown).
Doing so could result in damage to the data.
• If the same backup file (clp-***.bup) is already saved in the USB
flash memory, this operation will overwrite or replace this file with
new one.
1.
Connect the USB flash memory to the USB
[TO DEVICE] terminal.
2.
Press the [MENU] button several times to
select "System Menu."
3.
Use the [ ]/[ ] buttons to select "Backup,"
use the [>] button to call up the next display,
then use the [ ]/[ ] buttons to select
"Backup."
4.
Use the [>] button to call up the next display,
then use the [ ]/[ ] button select "Execute."
5.
Press the [>] button to execute the Backup
operation.
6.
Press the [EXIT] button to exit from the
System Menu display.
NOTE
When you want to restore the settings in the backup file, execute
the Restore function.
NOTE
Protected Songs cannot be backed up.