Midi Recording-Independent Tracks - Yamaha CLP- 585 Owner's Manual

MIDI Recording—Independent Tracks
MIDI
With MIDI Recording, you can create a MIDI Song consisting of 16 tracks by
recording your performance to each track one by one. In recording a piano
piece, for example, you can record the right-hand part to Track 1 then record
the left-hand part to Track 2, allowing you create a complete piece which may
be difficult to play live with both hands together. To record a performance with
Rhythm playback (only for CLP-585/575/545), for example, record Rhythm
playback to Tracks 9 – 10, then record melodies to Track 1 while listening to the
already recorded Rhythm playback. In this way, you can create an entire Song
which would otherwise be difficult, or even impossible, to play live.
Example:
1 2 3 4
Left-hand part
Right-hand part
1.
Execute the same operations as in step 1 and step 2 on
page 51 to enter the Recording mode with a new blank
Song selected.
2.
Press the [ ] button to highlight Track, then use the [<]/
[>] buttons to select a Recording Track.
When you want to record the right-hand part, highlight "R" (Track 1).
When you want to record the left-hand part, highlight "L" (Track 2).
Alternately, when you want to record your performance to Tracks 3 – 16,
call up the desired one by pressing the [<]/[>] buttons repeatedly.
3.
Play the keyboard to start recording.
4.
After you finish your performance, press the [] (Stop)
button to stop recording.
This operation exits from the Recording mode and calls up the display for
saving the recorded performance data.
5 6 7 8 9 10 11 12 13 14 15 16
Recording Track
NOTE
If you want to record your
performance to the USB flash
memory or you want to add the
recording to the MIDI Song in
the USB flash memory, refer to
"MIDI Recording to the USB
flash memory" (page 55).
NOTE
Rhythm cannot be added to
the recorded Song.
When you want to record a
new track of an already
recorded MIDI Song:
After selecting the target MIDI
Song (steps 1 – 4 on pages 39
– 40), press and hold the []
(Record) button for a second to
call up the display which lists
the Recording Target Songs,
select the 4th item (the
selected MIDI Song), press the
[>] button, then go to step 2
described on this page.
NOTE
If you record your performance
with both hands to track R then
to track L, both are played
back at the same time as a
single Song.
Recording Track
Assignment
When the Dual/Split is on, only
the R1 Voice performance will
be recorded to the Track you
select, the R2 Voice
Contains data.
performance will be recorded
to the Track number which is 6
Contains no data.
plus the selected Track, the L
Voice performance will be
recorded to the Track number
which is 3 plus the selected
Track. The Rhythm playback
will be recorded to the Tracks
9/10.
CLP-585/575/545/535/565GP Owner's Manual
Recording Your Performance
53