Yamaha CLP- 585 Owner's Manual page 90

System Menu
To call up the desired parameter:
Press the [MENU] button several times to select "System Menu," then use the [ ]/[ ]/[<]/[>] buttons to select the desired
parameter.
[>] [>]
[<] [<]
Keyboard Touch
Fixed Velocity
Split Point
Pedal Half Pedal Point (Slider display)
Soft Pedal
Depth
Pitch Bend
Range
Aux Polarity
(CLP-585)
Aux Assign
(CLP-585)
Aux Area
(CLP-585)
Play/Pause
Sound Brilliance
90
CLP-585/575/545/535/565GP Owner's Manual
[>]
[<]
(Setting display) Determines how the sound responds to your playing
strength. This setting does not change the weight of the
keyboard.
• Soft2: Produces relatively high volume even with light
playing strength. Best for players with a light touch.
• Soft1: Produces high volume with moderate playing
strength.
• Medium: Standard Touch Sensitivity.
• Hard1: Requires moderately strong playing for high
volume.
• Hard2: Requires strong playing to produce high
volume. Best for players with a heavy touch.
• Fixed: No touch response. The volume level will be the
same regardless of how hard you play the keys.
NOTE
The setting here will not be recorded to a MIDI Song and not
be transmitted as MIDI messages.
(Slider display) Determines the velocity with which you play the keys
when the Touch (above) is set to "Fixed."
NOTE
The setting here will not be recorded to a MIDI Song and not
be transmitted as MIDI messages.
(Setting display) Determines the Split Point (the boundary between the
right-hand and left-hand keyboard areas).
Here you can specify the point to which you must
depress the pedal (right and AUX) before the assigned
effect begins to be applied. This setting applies only to
the "Sustain Continuously" effect (page 83) that is
assigned to the right or AUX pedal.
(Slider display) Determines how deeply the Soft pedal effect is applied.
This parameter is available only for the pedal to which
"Soft" (page 83) is assigned.
(Slider display) Determines the range of the pitch bend that is produced
via the pedal in semitone steps. This setting is available
only for the pedal to which "Pitch Bend Up" or "Pitch
Bend Down" (page 83) is assigned.
NOTE
For some Voices, the pitch may not be changed according to
the Pitch Bend Range value set here.
– A pedal connected to the [AUX PEDAL] jack may switch
on and off differently. For example, some pedals turn the
effects on and others turn them off when you press
them. Use this parameter to reverse this mechanism.
(Setting display) Assigns a function to the pedal connected to the [AUX
PEDAL] jack.
(Setting display) Determines the keyboard area to which the function of
the pedal connected to the [AUX PEDAL] jack is
applied.
(Setting display) Assigns the [ / ] (Play/Pause) button's function to one
of the Left pedal, Center pedal and pedal connected to
the [AUX PEDAL] jack. If a value other than "Off" is
selected here, the corresponding pedal's function
assigned in the Voice Menu (page 82) is disabled.
(Setting display) Adjusts the brilliance of Voices played via the entire
keyboard.
Description Default setting Setting range
Medium Soft 2, Soft 1,
Medium, Hard 1,
Hard 2, Fixed
64 1 – 127
A-1 – C7
F 2
0 -2 (effective with
the shallowest
press) – 0 – +4
(effective with the
deepest press)
5 1 – 10
2 0 – +12 (Pressing
the pedal will
raise/lower the
pitch by 12
semitones
[1 octave])
Make Make, Break
Expression Refer to the Pedal
Function List
(page 83).
All All, Right, Left
Off Off, Left, Center,
AUX (CLP-585)
Normal Mellow 1 – 3,
Normal, Bright 1 –
3