Clp-575 Assembly - Yamaha CLP- 585 Owner's Manual

CLP-575 Assembly

Remove all parts from the package and make sure
you have all of the items.
A
Foamed styrol pads
Remove foamed styrol pads from the package, position them on the
floor, then place A on top of them. Position the pads so that they will not
block the speaker box on the bottom of A.
B
C
Bundled pedal cord
The pedals are covered with vinyl covers
inside
when shipped from the factory. Before
starting the assembly, please make sure to
remove the cover from the damper pedal.
D
6 × 20 mm thick screws × 10
4 × 12 mm thin screws × 2
4 × 20 mm tapping screws × 4
Power cord
E
Cord holders × 2
4 × 10 mm thin screws × 2
Headphone hanger
1.
Attach C to D and E.
E E
1-2
C C
1-1
1-1.
Untie and straighten out the bundled pedal
cord. Do not discard the vinyl tie. You will
need it later in step 5.
1-2.
Insert the protrusions into the holes on the
brackets, then attach D and E to C by
tightening the four thick screws (6 × 20 mm).
2.
Attach B.
Depending on the model of digital piano you
purchased, the surface color of one side of B may
be different from the other side. If so, position B
so that the side similar in color to D and E faces
the player.
2-1, 2-3
E
2-2
CLP-585/575/545/535/565GP Owner's Manual
Assembling the Clavinova
1-2
D D
1-2
B
D
111