Table of Contents
Advertisement
Assembling the Clavinova
8.
Attach C.
8-1
F
E
8-1
8-1.
Attach the 4 × 14 mm round head screws to
the brackets on the upper side of E and F.
Make sure to leave a slight gap by not fully
tightening the screws.
8-2
F
C
E
8-4
8-3
8-2.
Hook C with holes onto the screws attached
in step 8-1.
8-3.
Secure the lower part of C using two 4 ×
14 mm round head screws.
8-4.
Securely tighten the screws on the upper
part of C.
9.
Set the adjuster.
Rotate the adjuster until it comes in firm contact
with the floor surface.
10.
Attach the headphone hanger.
Use the two thin screws (4 × 10 mm) to attach the
hanger as shown in the illustration.
Page 110
- Quick Links:
- Using Headphones
- Connecting to Iphone/Ipad
Hide quick links:
Advertisement
Table of Contents
