Clp-585 Assembly - Yamaha CLP- 585 Owner's Manual

CLP-585 Assembly

Remove all parts from the package and make sure
you have all of the items.
A
Connector
panel
Foamed styrol pads
Remove foamed styrol pads from the package, position them on the
floor, then place A on top of them. Position the pads so that they will not
hide the connector panel on the bottom of A.
B
C
D
Bundled pedal
The pedals are covered with vinyl covers when
cord inside
shipped from the factory. Before starting the
assembly, please make sure to remove the
cover from the damper pedal.
E
6 × 20 mm round head screws × 4
6 × 20 mm flat head screws × 6
4 × 14 mm round head screws × 10
Power cord
F
Cord holders × 2
4 × 10 mm thin screws × 2
Headphone hanger
1.
Attach E and F to D.
E
1-2
1-1
1-1.
Remove the twist tie from the folded pedal
cord.
Don't discard the twist tie, you'll need it later in
step 6.
1-2.
While pushing the lower part of E and F
from the outside, secure D using four 6 ×
20 mm round head screws.
2.
Attach B.
Proper way to
hold B
F
B
D D
2-2
2-1.
Insert B between E and F as shown in the
illustration.
CLP-585/575/545/535/565GP Owner's Manual
Assembling the Clavinova
F
D
2-1
2-2
E
107