Metronome Menu - Yamaha CLP- 585 Owner's Manual

Metronome Menu

This menu lets you set the volume and tempo indication format of the Metronome (page 35) or Rhythm
(page 49). In addition, you can set the bell sound of the Metronome to play back at the first beat and adjust
parameters related to Rhythm playback variation. Note that the parameters such as Time Signature and
Tempo can be set on the display called up by pressing and holding the [METRONOME/RHYTHM] button
(or [METRONOME] button on the CLP-535/565GP) for a second.
To call up the desired parameter:
Press the [MENU] button several times to select "Metronome Menu," then use the [ ]/[ ] buttons to select the desired parameter.
[>] [>]
[<] [<]
Volume (Slider display)
BPM –
Bell –
Intro –
(CLP-585/
575/545)
Ending –
(CLP-585/
575/545)
SyncStart –
(CLP-585/
575/545)
[>]
Description
[<]
– Determines the volume of the Metronome or Rhythm. You
can adjust the volume balance between the keyboard
performance and the Metronome/Rhythm playback.
– Determines whether the note type of the tempo indication
is affected by the Metronome Time Signature (page 35)
or not (crotchet). When "Time Sig." is selected, the
denominator of the Time Signature is shown as the note
type of the tempo indication. (The dotted quarter note is
shown as the note type of the tempo indication only when
the Time Signature is set to "6/8," "9/8," or "12/8.")
– Determines whether or not the bell sound is played back
at the first beat of the specified Time Signature.
– Determines whether the Intro is played back or not
before the Rhythm pattern is started.
NOTE
During Song playback, the Intro cannot be played back even
if you start the Metronome with this parameter set to "on."
If "Synchro Start" function for Song is set to on (page 48),
pressing the [METRONOME/RHYTHM] button starts rhythm
from Intro.
– Whether the Ending is played back or not before the
Rhythm pattern is stopped.
– When this is set to "on," you can start Rhythm playback
also by pressing any note on the keyboard.
When you want to use this function, follow the instructions
below:
1. Set this function to on.
2. Press the [METRONOME/RHYTHM] button to enter
the Synchro start standby mode.
The [METRONOME/RHYTHM] button flashes.
3. Press any key to start with the rhythm.
Metronome Menu
Default setting Setting range
82 0 – 127
Time Sig. Time Sig.,
Crotchet
Off On, Off
On On, Off
On On, Off
Off On, Off
CLP-585/575/545/535/565GP Owner's Manual
87