Yamaha Clavinova CLP-230 Owner's Manual

Yamaha clavinova owner's manual clp-240, clp-230
Hide thumbs Also See for Clavinova CLP-230:
Table of Contents


C L P - 2 4 0 / 2 3 0
Before using the Clavinova, be sure to read "PRECAUTIONS" on pages 6 -7.
Achten Sie darauf, vor Einsatz des Clavinova die "VORSICHTSMASSNAHMEN" auf Seite 6 -7 durchzulesen.
Avant d'utiliser le Clavinova, lire attentivement la section «PRECAUTIONS D'USAGE» aux pages 6 - 7.
Antes de utilizar el Clavinova, lea las "PRECAUCIONES" que debe tener en cuenta en las páginas 6 - 7.
—Check your power supply—
Make sure that your local AC
mains voltage matches the
voltage specified on the name
plate on the bottom panel. In
some areas a voltage selector
may be provided on the bottom
panel of the main keyboard unit
near the power cord. Make sure
that the voltage selector is set for
the voltage in your area. The
voltage selector is set at 240V
when the unit is initially shipped.
To change the setting use a
"minus" screwdriver to rotate the
selector dial so that the correct
voltage appears next to the
pointer on the panel.
For information on assembling
the keyboard stand, refer to the
instructions at the end of this
—Überprüfen Sie Ihren
Vergewissern Sie sich, dass die
Spannung in Ihrem örtlichen
Stromnetz mit der Spannung
übereinstimmt, die auf dem
Typenschild auf der Unterseite
des Instruments angegeben ist. In
bestimmten Regionen ist auf der
Unterseite des Keyboards in der
Nähe des Netzkabels ein
Spannungswähler angebracht.
Vergewissern Sie sich, dass der
Spannungswähler auf die
Spannung Ihres lokalen
Stromnetzes eingestellt ist. Dieser
Spannungswähler ist bei
Auslieferung auf 240 V
eingestellt. Sie können die
Einstellung mit einem
Schlitzschraubenzieher ändern.
Drehen Sie dazu den
Wählschalter, bis der Pfeil auf
dem Instrument auf die richtige
Spannung zeigt.
Weitere Informationen über die
Montage des Keyboard-Ständers
erhalten Sie in den Anweisungen
am Ende dieses Handbuchs.
—Contrôler la source
Vérifiez que la tension spécifiée
sur le panneau inférieur
correspond à la tension du
secteur. Dans certaines régions,
l'instrument peut être équipé d'un
sélecteur de tension situé sur le
panneau inférieur du clavier à
proximité du cordon
Vérifiez que ce sélecteur est bien
réglé en fonction de la tension
secteur de votre région. Le
sélecteur de tension est réglé sur
240 V au départ d'usine. Pour
modifier ce réglage, utilisez un
tournevis à lame plate pour
tourner le sélecteur afin de mettre
l'indication correspondant à la
tension de votre région vis à vis
du repère triangulaire situé sur le
Pour obtenir des informations sur
l'assemblage du support du
clavier, reportez-vous aux
instructions à la fin de ce manuel.
—Verifique la alimentación de
Asegúrese de que tensión de
alimentación de CA de su área
corresponde con la tensión
especificada en la placa de
características del panel inferior.
En algunas zonas puede haberse
incorporado un selector de
tensión en el panel inferior de la
unidad del teclado principal,
cerca del cable de alimentación.
Asegúrese de que el selector de
tensión esté ajustado a la tensión
de su área. El selector de tensión
se ajusta a 240V cuando la
unidad sale de fábrica. Para
cambiar el ajuste, emplee un
destornillador de cabeza "recta"
para girar el selector de modo
que aparezca la tensión correcta
al lado del indicador del panel.
Para información sobre el
montaje del soporte del teclado,
consulte las instrucciones al final
de este manual.


Table of Contents

Summary of Contents for Yamaha Clavinova CLP-230

  • Page 1 C L P - 2 4 0 / 2 3 0 OWNER'S MANUAL BEDIENUNGSANLEITUNG MANUAL DE INSTRUCCIONES Before using the Clavinova, be sure to read “PRECAUTIONS” on pages 6 -7. Achten Sie darauf, vor Einsatz des Clavinova die “VORSICHTSMASSNAHMEN” auf Seite 6 -7 durchzulesen. Avant d'utiliser le Clavinova, lire attentivement la section «PRECAUTIONS D'USAGE»...
  • Page 2: Special Message Section

    SPECIFICATIONS SUBJECT TO CHANGE: information contained in this manual is believed to be correct at the time of printing. However, Yamaha reserves the right to change or modify any of the specifications without notice or obligation to update existing units.
  • Page 3: Introduction

    Thank you for purchasing the Yamaha Clavinova! We recommend that you read this manual carefully so that you can fully take advantage of the advanced and convenient functions of the Clavinova. We also recommend that you keep this manual in a safe and handy place for future reference.
  • Page 4: Table Of Contents

    F1. Fine Tuning of the Pitch... 47 F2. Selecting a Scale... 48 F3. Dual Mode Functions ... 49 F4. (CLP-240) Split Mode Functions ... 50 F5. (CLP-240) / F4. (CLP-230) Other Functions ... 51 F6. (CLP-240) / F5. (CLP-230) Metronome Volume ... 52 F7.
  • Page 5: Application Index

    Application Index Use this index to find reference pages that may be helpful for your particular application and situation. Listening Listening to demo songs with different voices... “Listening to the Demonstration Tunes” on page 14 Listening to songs from “50 Greats for the Piano”... “Listening to 50 Piano Preset Songs” on page 15 Listening to my recorded performance...
  • Page 6 The instrument contains no user-serviceable parts. If it should appear to be malfunctioning, discontinue use immediately and have it inspected by qualified Yamaha service personnel. CAUTION Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the instrument or other property.
  • Page 7 If you experience any hearing loss or ringing in the ears, consult a physician. Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed. Always turn the power off when the instrument is not in use.
  • Page 8: Panel Controls And Terminals

    Panel Controls and Terminals Panel Controls and Terminals The Yamaha Clavinova CLP-240/230 digital piano provides natural, expressive grand piano sound and playability, and features Yamaha’s original “AWM Dynamic Stereo Sampling (CLP-240)/AWM Stereo Sampling (CLP-230)” tone-genera- tion technology for rich, musical voices.
  • Page 9 1 [POWER] switch ... page 11 2 [MASTER VOLUME] slider ... page 12 Adjust the volume level using this slider. 3 [DEMO] button... page 14 Demonstration playback is available for each voice. 4 [TRANSPOSE] button... page 24 You can shift the pitch of the entire keyboard up or down so that the pitch will match that of another instrument or singer, while you play the same, unshifted keys.
  • Page 10: Before Using The Clavinova

    Before Using the Clavinova Before Using the Clavinova Key Cover To open the key cover: Lift the cover slightly, then push and slide it open. To close the key cover: Slide the cover toward you and gently lower the cover over the keys.
  • Page 11: Turning The Power On

    Use only the AC power cord supplied with the CLP-240/230. If the supplied cord is lost or damaged and needs to be replaced, contact your Yamaha dealer. The use of an inappropriate replacement can pose a fire and shock hazard! The type of AC power cord provided with the CLP-240/230 may be different depending on the country in which it is pur- chased.
  • Page 12: Setting The Volume

    Before Using the Clavinova Setting the Volume Initially set the [MASTER VOLUME] playing, re-adjust the [MASTER VOLUME] The level decreases. CAUTION Do not use the Clavinova at a high volume level for a long period of time, or your hearing may be damaged. TERMINOLOGY MASTER VOLUME: The volume level of the entire keyboard sound...
  • Page 13: Reference

    F4. (CLP-240) Split Mode Functions...50 F5. (CLP-240)/F4. (CLP-230) Other Functions ...51 F6. (CLP-240)/F5. (CLP-230) Metronome Volume ...52 F7. (CLP-240)/F6. (CLP-230) Song Part Cancel Volume ...52 F8. (CLP-240)/F7. (CLP-230) MIDI Functions ...52 F9. (CLP-240)/F8. (CLP-230) Backup Functions ...55 F9.5 (CLP-240)/F8.5 (CLP-230) Character Code ...55 Connections ...
  • Page 14: Listening To The Demonstration Tunes

    Listening to the Demonstration Tunes Listening to the Demonstration Tunes Demonstration tunes are provided that effectively demonstrate each of the CLP-240/230’s voices. 1 2 4 MASTER VOLUME DEMO TRANSPOSE Procedure Turn the power on. (In case the power is not turned ON) Press the When the power is turned ON, one of the voice button LEDs will light.
  • Page 15: Listening To 50 Piano Preset Songs

    Listening to 50 Piano Preset Songs The Clavinova provides performance data of 50 piano songs. You can simply listen to these songs (page 15) or use them for practice (page 17). You can also refer to the included “50 Greats for the Piano”...
  • Page 16 Listening to 50 Piano Preset Songs Exit from Preset Song mode. Press the [SONG SELECT] off, and the unit returns to normal play mode. How to use the practice functions You can turn the left- and right-hand parts on or off as required so you can practice the corresponding part (part cancel function) and continuously repeat a specified phrase within a song (song A-B repeat function).
  • Page 17: Practicing A One-Hand Part Using 50 Preset Songs (Part Cancel Function)

    Practicing a One-Hand Part Using 50 Preset Songs (Part Cancel Function) The 50 preset songs have separate left- and right-hand parts on individual parts. You can turn the left- and right-hand parts on or off as required so you can practice the corresponding part (the part that is turned off) on the keyboard.
  • Page 18: A-B Repeat For 50 Preset Songs

    Listening to 50 Piano Preset Songs A-B Repeat for 50 Preset Songs The A-B Repeat function can be used to continuously repeat a specified phrase within a preset song. Combined with the Part Cancel function described below, this provides an excellent way to practice difficult phrases.
  • Page 19: Selecting & Playing Voices

    Selecting & Playing Voices Selecting Voices LEFT RIGHT USER STOP PLAY/PAUSE PRESET SYNC START MASTER VOLUME DEMO TRANSPOSE SONG SONG SELECT FILE Procedure Select the desired voice by pressing one of the Voice buttons. Then, when you start playing, re-adjust the comfortable listening level.
  • Page 20: Using The Pedals

    Selecting & Playing Voices Using the Pedals The Clavinova has three foot pedals that produce a range of expressive effects similar to those produced by the pedals on an acoustic piano. Damper (Right) Pedal The damper pedal functions in the same way as a damper pedal on an acoustic piano.
  • Page 21: Clp-240)/[Brilliance]/[Reverb]/[Effect Dde] (Clp-240)

    Adding Variations to the Sound – [VARIATION] (CLP- 240)/[BRILLIANCE]/[REVERB]/[EFFECT]/[DDE] (CLP-240) LEFT RIGHT USER STOP PLAY/PAUSE PRESET SYNC START MASTER VOLUME DEMO TRANSPOSE SONG SONG SELECT FILE [VARIATION] (CLP-240) Lets you alter another aspect of the effect, depending on the selected type. Refer to “Preset Voice List”...
  • Page 22 Selecting & Playing Voices Procedure Pressing the button repeatedly toggles the reverb on and off. [REVERB] The indicators light in sequence each time the produced when all indicators are off. Adjusting Reverb Depth Adjust the reverb depth for the selected voice by using the while holding the button.
  • Page 23: Touch Sensitivity - [Touch]

    Touch Sensitivity – [TOUCH] You can select four different types of keyboard touch sensitivity — HARD, MEDIUM, SOFT or FIXED — to match different playing styles and preferences. HARD: Requires that the keys be played quite hard to produce maximum loud- ness.
  • Page 24: Transposition - [Transpose]

    Selecting & Playing Voices Transposition – [TRANSPOSE] The Clavinova’s Transpose function makes it possible to shift the pitch of the entire keyboard up or down in semitone intervals to facilitate playing in difficult key signatures, and to let you easily match the pitch of the keyboard to the range of a singer or other instruments.
  • Page 25: Combining Two Voices (Dual Mode)

    Combining Two Voices (Dual mode) You can play two voices simultaneously across the entire range of the keyboard. In this way, you can simulate a melody duet or combine two similar voices to create a thicker sound. LEFT RIGHT USER STOP PLAY/PAUSE PRESET...
  • Page 26: Splitting The Keyboard Range And Playing Two Different Voices (Split Mode) (Clp-240)

    Selecting & Playing Voices Splitting the Keyboard Range and Playing Two Different Voices (Split mode) (CLP-240) Split mode enables you to play two different voices on the keyboard — one with the left hand and another with the right hand. For example, you can play a bass part using the Wood Bass or Electric Bass voice with the left hand, and a melody with the right hand.
  • Page 27 Select a voice for the right hand. Press a voice button. Select a voice for the left hand. Press the corresponding voice button while holding the indicator of the Left Voice button will light while the To turn the variation on or off for the split voice, hold the press the button or the currently-selected voice button.
  • Page 28: Using The Metronome

    Selecting & Playing Voices Using the Metronome The Clavinova features a built-in metronome (a device that keeps an accurate tempo) that is conve- nient for practicing. MASTER VOLUME DEMO TRANSPOSE Procedure Start the metronome. The metronome sound is turned on by pressing METRONOME [ON/OFF] Adjusting the tempo The tempo of the metronome and user song recorder playback (the recorder is...
  • Page 29: Recording Your Performance

    Recording Your Performance The ability to record and play back what you’ve played on the CLP- 240/230 keyboard can be an effective practice aid. You can, for exam- ple, record just the left-hand part, and then practice the right-hand part while playing back the recorded left-hand part. Or, since you can record up to two parts separately, you could record the left- and right- hand parts separately, or record both parts of a duet and hear how they sound when played back.
  • Page 30: Start Recording

    Recording Your Performance Engage Record Ready mode. Press the button to engage Record Ready mode. This automatically selects [REC] an empty song for recording and makes the RIGHT part active. If an empty song does not exist, Song U01 will be selected. Recording does not actually start yet.
  • Page 31: Re-Recording A Previously Recorded Song

    Re-recording a previously recorded song This section explains how to record again in case your performance was not satisfactory. Procedure Select a voice or voices (and other settings) for recording, if necessary. Repeat Step 1 on page 29 if you wish to change the previous settings. Re-engage Record Ready mode.
  • Page 32: Recording To Right/Left

    Recording Your Performance Recording to RIGHT/LEFT This lets you record the right and left parts separately. Since you can record the left part while play- ing back the right, this is useful for recording both parts of a duet. Procedure Make all the initial settings.
  • Page 33 Recording Your Performance The user song recorder records the following data: Data in addition to the notes and voices you play is recorded. This data includes “Individual Parts” and “Entire Song.” See below. Individual Parts • Notes played • Voice selection •...
  • Page 34: Changing The Initial Settings (Data Recorded At The Beginning Of A Song)

    Recording Your Performance Changing the Initial Settings (Data recorded at the beginning of a song) The initial settings (data recorded at the beginning of a song) can be changed after the recording. For example, after recording, you can change the voice to create a different ambience or adjust the song tempo to your taste.
  • Page 35: Handling Songs With A Usb Storage Device (Clp-240)

    Handling Songs with a USB Storage Device (CLP-240) You can handle User songs (save, export and delete) with a USB stor- age device. You can also format the device or media. About Save and Export Save You can save three User songs in the instrument to the USB storage device as a single file (User file).
  • Page 36: Saving Songs

    Handling Songs with a USB Storage Device (CLP-240) Saving Songs MASTER VOLUME DEMO TRANSPOSE Procedure Select a file container in the device and save the User songs. After making sure that the USB storage device is connected to the instrument, press the button (the “SAVE/EXP.”...
  • Page 37: Exporting A Song In Smf Format

    Exporting a Song in SMF format TERMINOLOGY SMF (Standard MIDI File): The SMF (Standard MIDI File) format is one of the most common and widely compatible sequence for- mats used for storing sequence data. There are two variations: Format 0 and Format 1. A large number of MIDI devices are compatible with SMF Format 0, and most commercially available MIDI sequence data is provided in SMF Format 0.
  • Page 38: Deleting Song Files

    Handling Songs with a USB Storage Device (CLP-240) Deleting Song Files MASTER VOLUME DEMO TRANSPOSE Procedure Select a song file to be deleted. Press the button. (The “FORMAT/DEL” indicator lights.) Then, hold the [FILE] button, simultaneously press the [FILE] be deleted. Three types of files will be displayed in order: •...
  • Page 39: Formatting The Usb Storage Device

    Formatting the USB Storage Device LEFT RIGHT USER STOP PLAY/PAUSE PRESET SYNC START MASTER VOLUME DEMO TRANSPOSE SONG SONG SELECT FILE Procedure Engage the format mode. Press the button. (The “FORMAT/DEL” indicator lights.) Then, while [FILE] holding the [FILE] button, simultaneously press the tons.
  • Page 40: Playing Back Songs

    SMF Format 0. • ESEQ This sequence format is compatible with many of Yamaha’s MIDI devices, including the Clavinova series instruments. This is a common format used with various Yamaha software. In the ESEQ files, only DOC (Disk Orchestra Collection) files and Disklavier Piano Soft songs can be played back on this instrument.
  • Page 41: Playing Back User/External Songs On The Instrument

    Playing Back User/External Songs on the Instrument LEFT RIGHT USER STOP PLAY/PAUSE PRESET SYNC START MASTER VOLUME DEMO TRANSPOSE SONG SONG SELECT FILE Procedure Select the desired song. Press the button (the USER indicator lights). Then press the [SONG SELECT] buttons to select a song.
  • Page 42: Playing Back User Files From A Usb Storage Device (Clp-240)

    Playing Back Songs Playing Back User Files from a USB Storage Device (CLP-240) MASTER VOLUME DEMO TRANSPOSE Procedure Load a User song file from the USB storage device. After making sure that the USB storage device is connected to the instrument, press the button (the LOAD indicator lights).
  • Page 43: Playing Back Smf/External Songs From A Usb Storage Device (Clp-240)

    Playing Back SMF/External songs from a USB storage device (CLP-240) LEFT RIGHT USER STOP PLAY/PAUSE PRESET SYNC START MASTER VOLUME DEMO TRANSPOSE SONG SONG SELECT FILE Procedure Select the desired song. After making sure that the USB storage device is connected to the instrument, press the button (the USB indicator lights).
  • Page 44: Detailed Settings - [Function]

    You can set various parameters to make the best use of Clavinova functions, such as fine tuning the pitch or selecting a scale, etc. The following parameters are available. The CLP-240 has nine main functions, and the CLP-230 has eight main functions. Some of these main functions consist of a set of sub-modes. Parameter List...
  • Page 45: Basic Procedure In Function Mode

    (The indication of “ the status of the unit and usage.) Select a function. Use the [TEMPO/FUNCTION# from F1–F9 (CLP-240) / F1–F8 (CLP-230). TEMPO FUNCTION TEMPO / FUNCTION Use the [–/NO] [+/YES] buttons. If the function does not include sub-modes, start setting the parameters.
  • Page 46 Detailed Settings – [FUNCTION] Operation Example 1 (F1. Fine tuning of the pitch) TEMPO FUNCTION TEMPO / FUNCTION Engage the Function mode. Operation Example 2 (F3.1 “Dual Balance”) TEMPO FUNCTION TEMPO / FUNCTION Engage the Function mode. LED indication – /NO +/ YES Change the value.
  • Page 47: About Each Function

    About Each Function F1. Fine Tuning of the Pitch You can fine tune the pitch of the entire instru- ment. This function is useful when you play the Clavinova along with other instruments or CD music. 1. Engage the Function mode and select 2.
  • Page 48: F2. Selecting A Scale

    Detailed Settings – [FUNCTION] F2. Selecting a Scale You can select various scales. Equal Temperament is the most common con- temporary piano tuning scale. However, his- tory has known numerous other scales, many of which serve as the basis for certain genres of music.
  • Page 49: F3. Dual Mode Functions

    F3. Dual Mode Functions You can set various parameters for Dual mode to optimize the settings for the songs you play, such as adjusting the volume balance between two voices. Dual mode function settings are set individu- ally for each voice combination. 1.
  • Page 50: F4. (Clp-240) Split Mode Functions

    Detailed Settings – [FUNCTION] Split Mode Functions (CLP-240) This menu enables you to make various detailed settings for Split mode. By changing the split point or other setting, you can optimize the settings for the songs you play. 1. Select the voices in Split mode, then engage the Function mode and select 2.
  • Page 51: Other Functions

    / F4. (CLP-240) (CLP-230) Other Functions This section provides a variety of other func- tions, including letting you assign the opera- tion of the left pedal to one of several modes, and allowing you to select specific song chan- nels for playback.
  • Page 52: Metronome Volume

    SHORTCUT: You can jump directly to the metronome functions 240)/ (CLP-230) by pressing the [TEMPO/FUNCTION#] button while holding the METRONOME [ON/OFF] button. To exit the Function mode, you still need to press the [TEMPO/ FUNCTION#] button so that the TEMPO indicator lights up.
  • Page 53: Midi Receive Channel Selection

    F8.2: /F7.2: (CLP-240) (CLP-230) MIDI Receive Channel Selection In any MIDI control setup, the MIDI channels of the transmitting and receiving equipment must be matched for proper data transfer. This parameter enables you to specify the channel on which the Clavinova receives MIDI data.
  • Page 54: Initial Setup Send

    Detailed Settings – [FUNCTION] / F7.6: F8.6: (CLP-240) (CLP-230) Panel/Status Transmit This function causes all the current CLP-240/230 panel settings (selected voice, etc.) to be transmitted via the MIDI OUT terminal. TERMINOLOGY Setup Data: Data that contains a set of panel settings for the Clavinova.
  • Page 55: Backup Functions

    C7 key (right-most key on the keyboard) while turning the [POWER] This also erases all user song recorder data, and sets all backup on/off settings (F9 <CLP-240>/F8 <CLP-230>) to the normal settings. (The factory setting list is found on page 78.) CAUTION Do not turn off the power of the instrument when “CLr”...
  • Page 56: Connections

    AUX IN RCA pin plug RCA pin plug audio cable CLP-240 L/L+R AUX IN THRU MIDI CLP-230 MIDI TO HOST NOTE Use audio cables and adaptor plugs with no resistance. NOTE The Clavinova’s [MASTER VOL- UME] slider setting does not affect the signal output from the AUX OUT (LEVEL FIXED) jacks.
  • Page 57 2 AUX IN [R] [L/L+R] jacks The stereo outputs from another instrument can be connected to these jacks, allowing the sound of an external instrument to be reproduced via the Clavinova’s speakers. Refer to the diagram below and use audio cables to make the connec- tions.
  • Page 58: Connection To A Usb Storage Device (Clp-240)

    USB devices such as a computer keyboard or mouse cannot be used. The instrument does not necessarily support all commercially available USB storage devices. Yamaha cannot guarantee operation of USB storage devices that you purchase. Before pur- chasing USB storage devices, please consult your Yamaha dealer, or an authorized Yamaha distributor (see list at end of the Owner’s Manual) for advice, or visit the following web page:...
  • Page 59 To protect your data (write-protect): To prevent important data from being inadvertently erased, apply the write-protect provided with each storage device or media. If you are saving data to the USB storage device, make sure to disable write-protect. To display the data in the USB storage device To view the data of the USB storage device on the CLP display, press the [SONG SELECT] button a few times until the “USER”...
  • Page 60: Connecting A Personal Computer

    Connections Connecting a Personal Computer By connecting a computer to the Clavinova's USB [TO HOST] terminal, you can transfer data between the instrument and the computer via MIDI. To do this, install the USB MIDI driver and Musicsoft Downloader software from the included CD-ROM. CAUTION When connecting the Clavinova to a personal computer, first turn off the power to both the Clavi- nova and the computer before connecting any cables.
  • Page 61 Precautions when using the USB [TO HOST] terminal When connecting the computer to the USB [TO HOST] terminal, make sure to observe the following points. Failing to do so risks freezing the computer and corrupting or even losing the data. If the computer or the instrument freezes, turn the power to the instrument off or restart the computer.
  • Page 62: Data Backup

    Data Backup Data Backup For maximum data security Yamaha recommends that you save your important data to your com- puter by using the included application Musicsoft Downloader (MSD). This provides a convenient backup if the internal memory is damaged. Data that can be saved 1.
  • Page 63: Message List

    Message List Message Displayed after factory presets are recalled. CAUTION Do not turn off the power of the instrument when “CLr” appears in the display. Doing so may delete all song data in the instrument, including external songs (page 40). Displayed when Musicsoft Downloader is started on a computer connected to the instrument.
  • Page 64: Troubleshooting

    Check that the FILE “LOAD” indicator flashes after connecting the USB storage device. If the indicator does not flash, the device may be damaged. 3. Check that the compatibility of the device has been confirmed by Yamaha (page 58). 4. Select SONG SELECT “USB” again.
  • Page 65: Clp-240/230: Keyboard Stand Assembly

    CLP-240/230: Keyboard Stand Assembly CAUTION • Be careful not to confuse parts, and be sure to install all parts in the correct direction. Please assemble the unit in the appropriate sequence. • Assembly should be carried out by at least two persons. •...
  • Page 66 CLP-240/230: Keyboard Stand Assembly Attach B. Place the bottom edges of B on the feet’s protrud- ing edges of D and E, then, secure the top part in alignment with the protruding edges. Temporarily secure the top part using 4 x 12 mm thin screws.
  • Page 67: Voltage Selector

    Attach the cord holders to B, then clip the cord into the holders. Use a twist tie to bundle the pedal cord. CLP-240 CLP-230 Connect the power cord. 4 -1 Insert the AC power cord plug into the AC INLET.
  • Page 68 CLP-240/230: Keyboard Stand Assembly Set the adjuster. Rotate the adjuster until it comes in firm contact with the floor surface. Attach the headphone hanger. You can attach a headphone hanger on the Clavi- nova to hang the headphones. Install the headphone hanger using included two screws (4 x 10mm) as shown in the figure.
  • Page 69: Handling The Floppy Disk Drive (Fdd) And Floppy Disks (Clp-240)

    • To maintain the disk drive in optimum working order Yamaha recommends that you use a commercially-avail- able dry-type head cleaning disk to clean the head about once a month. Ask your Yamaha dealer about the avail- ability of proper head cleaning disks. About Floppy Disks Handle floppy disks with care, and follow...
  • Page 70: Installing The Floppy Disk Drive (Optional)

    Installing the Floppy Disk Drive (Optional) Installing the Floppy Disk Drive (Optional) The optional UD-FD01 floppy disk drive can be installed to the bottom of the CLP-240 by using the included floppy disk drive case and screws. Have a Phillips-head (+) screwdriver ready. Remove the three backing papers from the adhesive tape in the case, and fit the floppy disk drive into the case.
  • Page 71: Preset Voice List

  • Page 72 Preset Voice List Stereo Voice Name Sampling VARIATION GUITAR VARIATION WOOD BASS VARIATION E.BASS VARIATION *1. Dynamic Sampling provides multiple velocity-switched samples to accurately simulate the timbral response of an acoustic instrument. *2. Contains a very subtle sample that is produced when the keys are released. CLP-240/230 Owner’s Manual Touch Dynamic...
  • Page 73 CLP-230 Stereo Touch Voice Name Sampling Response GRANDPIANO 1 GRANDPIANO 2 E.PIANO 1 E.PIANO 2 HARPSICHORD 1 HARPSICHORD 2 VIBRAPHONE CHURCH ORGAN 1 CHURCH ORGAN 2 JAZZ ORGAN STRINGS 1 STRINGS 2 CHOIR GUITAR *1. Dynamic Sampling provides multiple velocity-switched samples to accurately simulate the timbral response of an acoustic instrument.
  • Page 74: Demo Song List

    Voice Name GRAND PIANO1 HARPSICHORD HARPSICHORD1 HARPSICHORD2 The demonstration pieces listed above are short rearranged excerpts of the original compositions. All other songs are original (©2005 Yamaha Corporation). Piano Voice Demo Description (CLP-240) Voice Name GRAND PIANO1 GRAND PIANO2 E.PIANO1 E.PIANO2...
  • Page 75: Index

    Index Numerics 50 Greats for the Piano ...15 50 Piano Preset Songs ...15 A-B Repeat...18 Adjust Tempo (50 Piano Preset Songs) ...15 Tempo (Recorded Songs) ...41 Volume (50 Piano Preset Songs) ...15 Volume (Metronome) ...52 ALL (LED display) ...15, 43 Assembly ...65–68 AUX IN ...57 AUX OUT...56...
  • Page 76 Index Normal setting...21 Part Cancel...17 Part Playback On and Off ...43 [PEDAL] jack...67 Pedals ...20 PHONES...12 Piano Voice Demo Description...74 Pitch Fine Tuning of the Pitch...47 PLAY/PAUSE (Demo) ...14 Play/Pause (Pedal)...43 [PLAY/PAUSE] button ...15, 41 Play/Pause playback Demonstration Tunes ...14 Recorded Songs ...41 Useful Playback Functions...43 Playing Back Songs...40...
  • Page 77 Appendix This section introduces reference material. In diesem Abschnitt finden Sie Referenzmaterial. Cette section présente le matériel de référence. En esta sección se incluye material de referencia. Factory Setting List Liste der Vorgabeeinstellungen Liste des réglages Lista de ajustes de fábrica... 78 MIDI Data Format MIDI-Datenformat Format des données MIDI...
  • Page 78: Factory Setting List

    Song Part Cancel Volume Backup Group CLP-240 CLP-230 F8.1 — F9.1 F8.1 — F9.4 F8.4 F9.1 F8.1 F9.4 — — — F9.1 F8.1 — — F9.3 F8.3 Backup Group Default CLP-240 CLP-230 F9.3 F8.3 F9.1 F8.1 F9.4 F8.4 F9.1 F8.1...
  • Page 79 Local Control F8.4 F7.4 Program Change Send & Receive F8.5 F7.5 Control Change Send & Receive Backup F9.5 F8.5 Character Code Function Default Voice: OFF MIDI – Others: ON Backup Group CLP-240 CLP-230 F9.2 F8.2 Always backed up CLP-240/230 Owner’s Manual...
  • Page 80: Midi Data Format

    MIDI Data Format / MIDI-Datenformat / Format des données MIDI / Formato de datos MIDI If you’re already very familiar with MIDI, or are using a computer to control your music hardware with computer-generated MIDI messages, the data provided in this section can help you to control the CLP-240/230. Falls Sie bereits mit MIDI vertraut sind oder einen Computer zur Erzeugung von MIDI-Steuermeldungen für die Instrumente verwenden, können Sie sich zur Steuerung des CLP-240/230 nach den im folgenden Abschnitt aufgeführten Spezifikationen richten.
  • Page 81 43H, 4CH, 20H, 20H (CL) 43H, 4CH, 50H, 27H, 30H, 35H (CLP05) 3xH, 3yH aaH, bbH: Device No. aa=LSB, bb=MSB aa=5EH, bb=16H (CLP-240) aa=5BH, bb=16H (CLP-230) [PANEL DATA] P.C.# [CHECK SUM (1byte)] = 0-(43H+4CH+20H+...+Data end) • Panel Data Contents (1) 1'st Voice...
  • Page 82 Data format: [F0H] -> [43H] -> [1nH] -> [4CH] -> [hhH] -> [mmH] -> [llH] -> [ddH] -> [F7H] F0H = Exclusive status 43H = YAMAHA ID 1nH = When received, n=0~F. When transmitted, n=0. 4CH = Model ID of XG...
  • Page 83 <Table 1> MIDI Parameter Change table (SYSTEM) Address (H) Size (H) Data (H) 00 00 00 020C - 05F4* 00 - 7F — TOTAL SIZE 07 *Values lower than 020CH select -50 cents. Values higher than 05F4H select +50 cents. <Table 2>...
  • Page 84: Midi Implementation Chart

    MIDI Implementation Chart YAMAHA [ Clavinova ] Model CLP-240/230 MIDI Implementation Chart Function... Basic Default Channel Changed Mode Default Messages Altered Note Number : True voice Velocity Note ON Note OFF After Key's Touch Ch's Pitch Bend Control Change 64,66,67...
  • Page 85: Specifications

    Gerät selbst oder Sonderzubehör nicht in jedem Land gleich sind, setzen Sie sich im Zweifel bitte mit Ihrem Yamaha-Händler in Verbindung. * Les caractéristiques techniques et les descriptions du mode d’emploi ne sont données que pour information. Yamaha Corp. se réserve le droit de changer ou modifier les produits et leurs caractéristiques techniques à...
  • Page 86: Important Safety Instructions

    Do NOT connect this type of product to any power supply or adapter other than one described in the owners manual, on the name plate, or specifically recommended by Yamaha. WARNING: Do not place this product or any other...
  • Page 87 * This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. IMPORTANT NOTICE FOR THE UNITED KINGDOM Connecting the Plug and Cord IMPORTANT.
  • Page 88 MEMO...
  • Page 89 For details of products, please contact your nearest Yamaha representative or the authorized distributor listed below. Pour plus de détails sur les produits, veuillez-vous adresser à Yamaha ou au distributeur le plus proche de vous figurant dans la liste suivante.
  • Page 90 Clavinova Web site http://music.yamaha.com/homekeyboard Yamaha Manual Library http://www.yamaha.co.jp/manual/ U.R.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation © 2005 Yamaha Corporation WH96240 612MWAP5.3-02B0 Printed in China...

This manual is also suitable for:

Clavinova clp-240230

Table of Contents